[PATCH v4 0/5] mtd: pxa3xx_nand: rework the timing setup
Brian Norris
computersforpeace at gmail.com
Mon Oct 26 11:38:36 PDT 2015
Hi,
On Mon, Oct 26, 2015 at 10:50:33AM -0300, Ezequiel Garcia wrote:
> On 21 Oct 10:28 AM, Antoine Tenart wrote:
> > Hello,
> >
> > Let's try one more time to get this merged.
> >
> > This series was part of a bigger one[1], which was split into smaller
> > ones as asked by Ezequiel[2]. When we take this into account this is
> > v9; with a v1 sent in January, 9 months ago.
Thanks for the persistence.
> > Another series, introducing the Berlin nand support, depends on this.
> >
> > The aim here is to use the nand framework to setup the timings,
> > while keeping the old in-driver way of configuration timings for
> > compatibility reasons.
> >
> > You can find the series at:
> > https://github.com/atenart/linux.git berlin/4.3/nand-timings
> >
> > Antoine
> >
> > Since v3:
> > - Moved back a chunk into the right patch.
> > - Called pxa3xx_nand_config_flash() before KEEP_CONFIG.
> > - Rebased on top of l2-mtd.git master.
> >
> > Since v2:
> > - Added back the support for keep-config 16 bits devices
> > - Fixed wrong unit in a calculation
> > - Reworked the pxa3xx_nand_init_timings() logic
> > - Allowed compile test the pxa3xx driver
> >
> > Since v1:
> > - Rebased on top of v4.2-rc1
> >
> > Since the series was split up:
> > - Reworked the ndcr setup
> > - Removed the read_id_bytes update after device detection
> >
> > Antoine Tenart (5):
> > mtd: pxa3xx: prepare allowing compile test
>
> Nit: This commit subject sounds a bit off.
I fixed that up a bit to my liking.
> > mtd: nand: allow compile test of MTD_NAND_PXA3xx
> > mtd: pxa3xx_nand: add helpers to setup the timings
> > mtd: pxa3xx_nand: rework flash detection and timing setup
> > mtd: pxa3xx_nand: clean up the pxa3xx timings
> >
> > drivers/mtd/nand/Kconfig | 2 +-
> > drivers/mtd/nand/pxa3xx_nand.c | 274 +++++++++++++++++++++++++----------------
> > 2 files changed, 168 insertions(+), 108 deletions(-)
> >
>
> The series look good and it's certainly a great improvement.
> Thomas and Robert tested it, so we should be good to go:
>
> Acked-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
Thanks for the reviews.
Pushed all but patch 2 to l2-mtd.git.
> We can take a look at the timeout reported by Thomas afterwards.
>
> BTW, it would be great if you could post a patch using Boris'
> timings helpers: https://patchwork.ozlabs.org/patch/534919/ ?
Brian
More information about the linux-arm-kernel
mailing list