[PATCH 2/4] drivers: exynos-srom: Add support for bank configuration
Pavel Fedin
p.fedin at samsung.com
Mon Oct 26 04:47:42 PDT 2015
Bindings are based on u-boot implementation, however they are stored in
subnodes, providing support for more than one bank.
Since the driver now does more than suspend-resume support, dependency on
CONFIG_PM is removed.
Signed-off-by: Pavel Fedin <p.fedin at samsung.com>
---
arch/arm/mach-exynos/Kconfig | 2 +-
drivers/soc/samsung/Kconfig | 2 +-
drivers/soc/samsung/exynos-srom.c | 42 ++++++++++++++++++++++++++++++++++++++-
3 files changed, 43 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 83c85f5..c22dc42 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -16,7 +16,7 @@ menuconfig ARCH_EXYNOS
select ARM_GIC
select COMMON_CLK_SAMSUNG
select EXYNOS_THERMAL
- select EXYNOS_SROM if PM
+ select EXYNOS_SROM
select HAVE_ARM_SCU if SMP
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 2833b5b..ea4bc2a 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -8,6 +8,6 @@ config SOC_SAMSUNG
config EXYNOS_SROM
bool
- depends on ARM && ARCH_EXYNOS && PM
+ depends on ARM && ARCH_EXYNOS
endmenu
diff --git a/drivers/soc/samsung/exynos-srom.c b/drivers/soc/samsung/exynos-srom.c
index 57a232d..6c8c56a 100644
--- a/drivers/soc/samsung/exynos-srom.c
+++ b/drivers/soc/samsung/exynos-srom.c
@@ -67,9 +67,46 @@ static struct exynos_srom_reg_dump *exynos_srom_alloc_reg_dump(
return rd;
}
+static int decode_sromc(struct exynos_srom *srom, struct device_node *np)
+{
+ u32 bank, width;
+ u32 timing[7];
+ u32 bw;
+
+ if (of_property_read_u32(np, "bank", &bank))
+ return -ENXIO;
+ if (of_property_read_u32(np, "width", &width))
+ width = 1;
+ if (of_property_read_u32_array(np, "srom-timing", timing, 7)) {
+ pr_err("Could not decode SROMC configuration\n");
+ return -ENXIO;
+ }
+
+ bank *= 4; /* Convert bank into shift/offset */
+
+ bw = 1 << EXYNOS_SROM_BW__BYTEENABLE__SHIFT;
+ if (width == 2)
+ bw |= 1 << EXYNOS_SROM_BW__DATAWIDTH__SHIFT;
+ bw <<= bank;
+ bw |= __raw_readl(srom->reg_base + EXYNOS_SROM_BW) &
+ ~(EXYNOS_SROM_BW__CS_MASK << bank);
+ __raw_writel(bw, srom->reg_base + EXYNOS_SROM_BW);
+
+ __raw_writel((timing[0] << EXYNOS_SROM_BCX__PMC__SHIFT) |
+ (timing[1] << EXYNOS_SROM_BCX__TACP__SHIFT) |
+ (timing[2] << EXYNOS_SROM_BCX__TCAH__SHIFT) |
+ (timing[3] << EXYNOS_SROM_BCX__TCOH__SHIFT) |
+ (timing[4] << EXYNOS_SROM_BCX__TACC__SHIFT) |
+ (timing[5] << EXYNOS_SROM_BCX__TCOS__SHIFT) |
+ (timing[6] << EXYNOS_SROM_BCX__TACS__SHIFT),
+ srom->reg_base + EXYNOS_SROM_BC0 + bank);
+
+ return 0;
+}
+
static int exynos_srom_probe(struct platform_device *pdev)
{
- struct device_node *np;
+ struct device_node *np, *child;
struct exynos_srom *srom;
struct device *dev = &pdev->dev;
@@ -100,6 +137,9 @@ static int exynos_srom_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ for_each_child_of_node(np, child)
+ decode_sromc(srom, child);
+
return 0;
}
--
2.4.4
More information about the linux-arm-kernel
mailing list