[PATCH v2 0/2] i2c: uniphier: add two I2C controller drivers for UniPhier SoC platform

[Lee Jones]

> This series adds two I2C controller drivers.
> (they are completely different IPs.)
> 
> The first one is a very simple FIFO-less I2C controller,
> which is used on some older UniPhier SoCs.
> 
> The other one is higher-performance I2C controller with TX/RX FIFO,
> used on newer UniPhier SoCs.

And you have sent this to me because ... ?

> Changes in v2:
>   - Delete if-block after platform_get_resource()
>   - Add I2C_FUNC_SMBUS_EMUL to functionality
>   - Add bindings document
>   - Add entry to MAINTAINERS
>   - Delete if-block after platform_get_resource()
>   - Add I2C_FUNC_SMBUS_EMUL to functionality
>   - Add bindings document
>   - Fix a typo in a comment block
> 
> Masahiro Yamada (2):
>   i2c: uniphier: add UniPhier FIFO-less I2C driver
>   i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver
> 
>  .../devicetree/bindings/i2c/i2c-uniphier-f.txt     |  25 +
>  .../devicetree/bindings/i2c/i2c-uniphier.txt       |  25 +
>  MAINTAINERS                                        |   1 +
>  drivers/i2c/busses/Kconfig                         |  16 +
>  drivers/i2c/busses/Makefile                        |   2 +
>  drivers/i2c/busses/i2c-uniphier-f.c                | 584 +++++++++++++++++++++
>  drivers/i2c/busses/i2c-uniphier.c                  | 441 ++++++++++++++++
>  7 files changed, 1094 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-uniphier-f.txt
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-uniphier.txt
>  create mode 100644 drivers/i2c/busses/i2c-uniphier-f.c
>  create mode 100644 drivers/i2c/busses/i2c-uniphier.c
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog