[PATCH v3 2/2] ARM: dts: mediatek: add MT2701 basic support
erin.lo
erin.lo at mediatek.com
Mon Oct 26 00:10:38 PDT 2015
On Fri, 2015-10-23 at 12:48 +0200, Matthias Brugger wrote:
>
> On 20/10/15 08:34, Erin Lo wrote:
> > This adds basic chip support for Mediatek 2701.
> >
> > Signed-off-by: Erin Lo <erin.lo at mediatek.com>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/mt2701-evb.dts | 29 ++++++++
> > arch/arm/boot/dts/mt2701.dtsi | 146 ++++++++++++++++++++++++++++++++++++++
> > arch/arm/mach-mediatek/mediatek.c | 1 +
> > 4 files changed, 177 insertions(+)
> > create mode 100644 arch/arm/boot/dts/mt2701-evb.dts
> > create mode 100644 arch/arm/boot/dts/mt2701.dtsi
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 233159d..aec787e 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -732,6 +732,7 @@ dtb-$(CONFIG_MACH_DOVE) += \
> > dove-dove-db.dtb \
> > dove-sbc-a510.dtb
> > dtb-$(CONFIG_ARCH_MEDIATEK) += \
> > + mt2701-evb.dtb \
> > mt6580-evbp1.dtb \
> > mt6589-aquaris5.dtb \
> > mt6592-evb.dtb \
> > diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
> > new file mode 100644
> > index 0000000..082ca88
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/mt2701-evb.dts
> > @@ -0,0 +1,29 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Erin Lo <erin.lo at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +/dts-v1/;
> > +#include "mt2701.dtsi"
> > +
> > +/ {
> > + model = "MediaTek MT2701 evaluation board";
> > + compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
> > +
> > + memory {
> > + reg = <0 0x80000000 0 0x40000000>;
> > + };
> > +};
> > +
> > +&uart0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> > new file mode 100644
> > index 0000000..69f240f
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/mt2701.dtsi
> > @@ -0,0 +1,146 @@
> > +/*
> > + * Copyright (c) 2015 MediaTek Inc.
> > + * Author: Erin.Lo <erin.lo at mediatek.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 as
> > + * published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include "skeleton64.dtsi"
> > +
> > +/ {
> > + compatible = "mediatek,mt2701";
> > + interrupt-parent = <&sysirq>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu at 0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0x0>;
> > + };
> > + cpu at 1 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0x1>;
> > + };
> > + cpu at 2 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0x2>;
> > + };
> > + cpu at 3 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + reg = <0x3>;
> > + };
> > + };
> > +
> > + system_clk: dummy13m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <13000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + rtc_clk: dummy32k {
> > + compatible = "fixed-clock";
> > + clock-frequency = <32000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + uart_clk: dummy26m {
> > + compatible = "fixed-clock";
> > + clock-frequency = <26000000>;
> > + #clock-cells = <0>;
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv7-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
> > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > + };
> > +
> > + watchdog: watchdog at 10007000 {
> > + compatible = "mediatek,mt2701-wdt",
> > + "mediatek,mt6589-wdt";
> > + reg = <0 0x10007000 0 0x100>;
> > + };
> > +
> > + timer: timer at 10008000 {
> > + compatible = "mediatek,mt2701-timer",
> > + "mediatek,mt6577-timer";
> > + reg = <0x10008000 0x80>;
>
> I suppose reg should look like this:
> reg = <0 0x10008000 0 0x80>;
>
> I fixed it and pushed the patch to v4.4-next/dts
> Please let me know if this is not working, I have no hardware to test it.
>
It works fine.
Thanks you.
Regards,
-Erin
> > + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&system_clk>, <&rtc_clk>;
> > + clock-names = "system-clk", "rtc-clk";
> > + };
> > +
> > + sysirq: interrupt-controller at 10200100 {
> > + compatible = "mediatek,mt2701-sysirq",
> > + "mediatek,mt6577-sysirq";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + interrupt-parent = <&gic>;
> > + reg = <0 0x10200100 0 0x1c>;
> > + };
> > +
> > + gic: interrupt-controller at 10211000 {
> > + compatible = "arm,cortex-a7-gic";
> > + interrupt-controller;
> > + #interrupt-cells = <3>;
> > + interrupt-parent = <&gic>;
> > + reg = <0 0x10211000 0 0x1000>,
> > + <0 0x10212000 0 0x1000>,
> > + <0 0x10214000 0 0x2000>,
> > + <0 0x10216000 0 0x2000>;
> > + };
> > +
> > + uart0: serial at 11002000 {
> > + compatible = "mediatek,mt2701-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11002000 0 0x400>;
> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart1: serial at 11003000 {
> > + compatible = "mediatek,mt2701-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11003000 0 0x400>;
> > + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart2: serial at 11004000 {
> > + compatible = "mediatek,mt2701-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11004000 0 0x400>;
> > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
> > +
> > + uart3: serial at 11005000 {
> > + compatible = "mediatek,mt2701-uart",
> > + "mediatek,mt6577-uart";
> > + reg = <0 0x11005000 0 0x400>;
> > + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
> > + clocks = <&uart_clk>;
> > + status = "disabled";
> > + };
> > +};
> > diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> > index a954900..1b98f7a 100644
> > --- a/arch/arm/mach-mediatek/mediatek.c
> > +++ b/arch/arm/mach-mediatek/mediatek.c
> > @@ -18,6 +18,7 @@
> > #include <asm/mach/arch.h>
> >
> > static const char * const mediatek_board_dt_compat[] = {
> > + "mediatek,mt2701",
> > "mediatek,mt6589",
> > "mediatek,mt6592",
> > "mediatek,mt8127",
> >
More information about the linux-arm-kernel
mailing list