[PATCH v2 0/9] Add tune support of Mediatek MMC driver
chaotian.jing at mediatek.com
Wed Oct 21 19:18:49 PDT 2015
On Tue, 2015-10-20 at 18:41 +0200, Ulf Hansson wrote:
> On 20 October 2015 at 11:13, Chaotian Jing <chaotian.jing at mediatek.com> wrote:
> > Change in v2:
> > Drop the 400mhz and use assigned-clock-parents to instead
> > Split the original tune patch to several independent patches
> > Re-write the mmc_send_tuning()
> > Fix GPD checksum error
> > Move the HS400 setting to ops->prepare_hs400_tuning()
> > Modify SD driving settings
> > Change in v1:
> > Add DT bindings for eMMC hardware reset
> > Add pinctrl of data strobe pin for HS400 mode
> > Modify eMMC driving settings
> > Add 400mhz source clock for HS400 mode
> > Add eMMC HS200/HS400 mode support
> > Add SD SDR50/SDR104 mode support
> > Add implement of tune function with CMD19/CMD21
> > Chaotian Jing (9):
> > mmc: core: Add DT bindings for eMMC hardware reset support
> > mmc: dt-bindings: update Mediatek MMC bindings
> > mmc: mediatek: make cmd_ints_mask to const
> > mmc: mediatek: change the argument "ddr" to "timing"
> > mmc: mediatek: fix got GPD checksum error interrupt when data transfer
> > mmc: mediatek: add implement of ops->hw_reset()
> > mmc: mmc: extend the mmc_send_tuning()
> > mmc: mediatek: add HS400 support
> > arm64: dts: mediatek: add HS200/HS400/SDR50/SDR104 support
> > Documentation/devicetree/bindings/mmc/mmc.txt | 1 +
> > Documentation/devicetree/bindings/mmc/mtk-sd.txt | 11 +-
> > arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 27 ++-
> > drivers/mmc/core/host.c | 2 +
> > drivers/mmc/core/mmc_ops.c | 8 +-
> > drivers/mmc/host/dw_mmc-exynos.c | 4 +-
> > drivers/mmc/host/dw_mmc.c | 2 +-
> > drivers/mmc/host/dw_mmc.h | 2 +-
> > drivers/mmc/host/mtk-sd.c | 296 ++++++++++++++++++++---
> > drivers/mmc/host/sdhci-esdhc-imx.c | 6 +-
> > drivers/mmc/host/sdhci-msm.c | 2 +-
> > drivers/mmc/host/sdhci-sirf.c | 2 +-
> > include/linux/mmc/core.h | 2 +-
> > 13 files changed, 314 insertions(+), 51 deletions(-)
> > --
> > 188.8.131.52.dirty
> I have reviewed the patches, I think they overall looks good! Some
> comments though.
> You need to split patch 9, the DT parts enabling hw reset shall go in
Ok, will separate it at next revision.
> Regarding the hw-reset changes in patch1, patch6 and patch9, I believe
> I requested you to separate the HW reset changes from $subject
> patchset as they are unrelated, please do this.
As you know, the hw-reset is a part of mmc retune.
so that I add it to this series.
> Running checkpatch, it gave me warnings and errors for patch 8.
> Patch7 didn't apply to my next branch.
I will fix the checkpatch warnings and errors at next revision.
by the way, I tried to use "git am
0007-mmc-mmc-extend-the-mmc_send_tuning.patch" in your branch,
there was no conflict, so why couldn't apply it ?
> Kind regards
More information about the linux-arm-kernel