[PATCH v3 0/5] Armada 38x SDHCI driver improvements
Marcin Wojtas
mw at semihalf.com
Wed Oct 21 04:59:44 PDT 2015
Hi Ulf,
Do you have any remarks or comments to the series?
Best regards,
Marcin
2015-10-15 18:25 GMT+02:00 Marcin Wojtas <mw at semihalf.com>:
> Hi,
>
> Thank you for reviewing the patches. According to your remarks and some
> new ideas I prepared third patchset. I modified my HW and now I could
> check operation when using all three modes of detection (polling, gpio
> and dat3) - it all seems working fine. Any remarks will be wellcome.
>
> Best regards,
> Marcin
>
> Changes:
> v1 -> v2
> * enable SW polling as card detection
> * in resume function change condition for mbus windows reconfiguration
>
> v2 -> v3
> * remove redundant print after fail of mbus_win_regs obtaining
> * add big comment on possible card detection options in armada-388-gp.dts
> * reconstruct dat3-cd support
> - use dedicated flag in sdhci_pxa structure instead of checking
> property in DT
> - instead of global SDHCI quirk add wrapper for sdhci_set_clock
> function in order to keep internal clock enabled
> - prevent using pm_runtime in case of using dat3-cd
> * improve MMC_CARD bit modification - do not check Armada 38x compatible
> string in pxav3_init_card callback, but use pxa->mbus_win_regs as a flag
>
> Marcin Wojtas (5):
> mmc: sdhci-pxav3: enable proper resuming on Armada 38x SoC
> mmc: sdhci-pxav3: enable usage of DAT3 pin as HW card detect
> ARM: mvebu: set SW polling as SDHCI card detection on A388-GP
> mmc: sdhci: add init_card callback to sdhci
> mmc: sdhci-pxav3: enable modifying MMC_CARD bit during card
> initialization
>
> .../devicetree/bindings/mmc/sdhci-pxa.txt | 5 +
> arch/arm/boot/dts/armada-388-gp.dts | 15 +-
> drivers/mmc/host/sdhci-pxav3.c | 157 ++++++++++++++++-----
> drivers/mmc/host/sdhci.c | 9 ++
> drivers/mmc/host/sdhci.h | 1 +
> 5 files changed, 149 insertions(+), 38 deletions(-)
>
> --
> 1.8.3.1
>
More information about the linux-arm-kernel
mailing list