[PATCH RFC v2 2/2] simplefb: Claim and enable regulators

Hans de Goede hdegoede at redhat.com
Wed Oct 21 00:54:17 PDT 2015


Hi,

On 21-10-15 07:59, Chen-Yu Tsai wrote:
> This claims and enables regulators listed in the simple framebuffer dt
> node. This is needed so that regulators powering the display pipeline
> and external hardware, described in the device node and known by the
> kernel code, will remain properly enabled.
>
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>   drivers/video/fbdev/simplefb.c | 122 ++++++++++++++++++++++++++++++++++++++++-
>   1 file changed, 121 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/video/fbdev/simplefb.c b/drivers/video/fbdev/simplefb.c
> index 52c5c7e63b52..c4ee10d83a70 100644
> --- a/drivers/video/fbdev/simplefb.c
> +++ b/drivers/video/fbdev/simplefb.c
> @@ -28,7 +28,10 @@
>   #include <linux/platform_device.h>
>   #include <linux/clk.h>
>   #include <linux/clk-provider.h>
> +#include <linux/of.h>
>   #include <linux/of_platform.h>
> +#include <linux/parser.h>
> +#include <linux/regulator/consumer.h>
>
>   static struct fb_fix_screeninfo simplefb_fix = {
>   	.id		= "simple",
> @@ -174,6 +177,10 @@ struct simplefb_par {
>   	int clk_count;
>   	struct clk **clks;
>   #endif
> +#if defined CONFIG_OF && defined CONFIG_REGULATOR
> +	u32 regulator_count;
> +	struct regulator **regulators;
> +#endif
>   };
>
>   #if defined CONFIG_OF && defined CONFIG_COMMON_CLK
> @@ -269,6 +276,112 @@ static int simplefb_clocks_init(struct simplefb_par *par,
>   static void simplefb_clocks_destroy(struct simplefb_par *par) { }
>   #endif
>
> +#if defined CONFIG_OF && defined CONFIG_REGULATOR
> +
> +#define SUPPLY_SUFFIX "-supply"
> +
> +/*
> + * Regulator handling code.
> + *
> + * Here we handle the num-supplies and vin*-supply properties of our
> + * "simple-framebuffer" dt node. This is necessary so that we can make sure
> + * that any regulators needed by the display hardware that the bootloader
> + * set up for us (and for which it provided a simplefb dt node), stay up,
> + * for the life of the simplefb driver.
> + *
> + * When the driver unloads, we cleanly disable, and then release the
> + * regulators.
> + *
> + * We only complain about errors here, no action is taken as the most likely
> + * error can only happen due to a mismatch between the bootloader which set
> + * up simplefb, and the regulator definitions in the device tree. Chances are
> + * that there are no adverse effects, and if there are, a clean teardown of
> + * the fb probe will not help us much either. So just complain and carry on,
> + * and hope that the user actually gets a working fb at the end of things.
> + */
> +static int simplefb_regulators_init(struct simplefb_par *par,
> +	struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct property *prop;
> +	struct regulator *regulator;
> +	const char *p;
> +	int count = 0, i = 0, ret;
> +
> +	if (dev_get_platdata(&pdev->dev) || !np)
> +		return 0;
> +
> +	/* Count the number of regulator supplies */
> +	for_each_property_of_node(np, prop) {
> +		p = strstr(prop->name, SUPPLY_SUFFIX);
> +		if (p && p != prop->name)
> +			count++;
> +	}
> +
> +	if (!count)
> +		return 0;
> +
> +	par->regulators = devm_kcalloc(&pdev->dev, count,
> +				       sizeof(struct regulator *), GFP_KERNEL);
> +	if (!par->regulators)
> +		return -ENOMEM;
> +
> +	/* Get all the regulators */
> +	for_each_property_of_node(np, prop) {
> +		char name[32]; /* 32 is max size of property name */
> +
> +		p = strstr(prop->name, SUPPLY_SUFFIX);
> +		if (p && p != prop->name)
> +			continue;
> +
> +		strlcpy(name, prop->name,
> +			strlen(prop->name) - sizeof(SUPPLY_SUFFIX) + 1);
> +		regulator = devm_regulator_get_optional(&pdev->dev, name);
> +		if (IS_ERR(regulator)) {
> +			if (PTR_ERR(regulator) == -EPROBE_DEFER)
> +				return -EPROBE_DEFER;
> +			dev_err(&pdev->dev, "regulator %s not found: %ld\n",
> +				name, PTR_ERR(regulator));
> +			continue;
> +		}
> +		par->regulators[i++] = regulator;

So you only fill slots when the regulator_get has succeeded

> +	}
> +	par->regulator_count = i;

and regulator_count now is the amount of successfully gotten regulators
(which may be different from count).

> +
> +	/* Enable all the regulators */
> +	for (i = 0; i < par->regulator_count; i++) {
> +		if (par->regulators[i]) {

That means that this "if" is not necessary, it will always be true.

> +			ret = regulator_enable(par->regulators[i]);
> +			if (ret) {
> +				dev_err(&pdev->dev,
> +					"failed to enable regulator %d: %d\n",
> +					i, ret);
> +				devm_regulator_put(par->regulators[i]);
> +				par->regulators[i] = NULL;
> +			}
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void simplefb_regulators_destroy(struct simplefb_par *par)
> +{
> +	int i;
> +
> +	if (!par->regulators)
> +		return;
> +
> +	for (i = 0; i < par->regulator_count; i++)
> +		if (par->regulators[i])

And idem for this if.

Other then that this patch looks good and is:

Reviewed-by: Hans de Goede <hdegoede at redhat.com>

Regards,

Hans


> +			regulator_disable(par->regulators[i]);
> +}
> +#else
> +static int simplefb_regulators_init(struct simplefb_par *par,
> +	struct platform_device *pdev) { return 0; }
> +static void simplefb_regulators_destroy(struct simplefb_par *par) { }
> +#endif
> +
>   static int simplefb_probe(struct platform_device *pdev)
>   {
>   	int ret;
> @@ -340,6 +453,10 @@ static int simplefb_probe(struct platform_device *pdev)
>   	if (ret < 0)
>   		goto error_unmap;
>
> +	ret = simplefb_regulators_init(par, pdev);
> +	if (ret < 0)
> +		goto error_clocks;
> +
>   	dev_info(&pdev->dev, "framebuffer at 0x%lx, 0x%x bytes, mapped to 0x%p\n",
>   			     info->fix.smem_start, info->fix.smem_len,
>   			     info->screen_base);
> @@ -351,13 +468,15 @@ static int simplefb_probe(struct platform_device *pdev)
>   	ret = register_framebuffer(info);
>   	if (ret < 0) {
>   		dev_err(&pdev->dev, "Unable to register simplefb: %d\n", ret);
> -		goto error_clocks;
> +		goto error_regulators;
>   	}
>
>   	dev_info(&pdev->dev, "fb%d: simplefb registered!\n", info->node);
>
>   	return 0;
>
> +error_regulators:
> +	simplefb_regulators_destroy(par);
>   error_clocks:
>   	simplefb_clocks_destroy(par);
>   error_unmap:
> @@ -373,6 +492,7 @@ static int simplefb_remove(struct platform_device *pdev)
>   	struct simplefb_par *par = info->par;
>
>   	unregister_framebuffer(info);
> +	simplefb_regulators_destroy(par);
>   	simplefb_clocks_destroy(par);
>   	framebuffer_release(info);
>
>



More information about the linux-arm-kernel mailing list