[PATCH v2 0/6] Switch to generic syscon regmap based drivers

Alim Akhtar alim.akhtar at samsung.com
Tue Oct 20 23:09:32 PDT 2015



On 10/20/2015 10:53 PM, Markus Reichl wrote:
> Am Dienstag, 20. Oktober 2015, 21:22:05 schrieb Alim Akhtar:
>> On Tue, Oct 20, 2015 at 9:17 PM, Alim Akhtar <alim.akhtar at gmail.com> wrote:
>>> Hi Markus,
>>>
>>> On Tue, Oct 20, 2015 at 8:29 PM, Markus Reichl <m.reichl at fivetechno.de> wrote:
>>>> Am 20.10.2015 um 11:24 schrieb Alim Akhtar:
>>>>> Now we have a nice way to reboot/poweroff system using a generic
>>>>> syscon regmap based drivers, this series moves exynos SoCs to
>>>>> make use of the same.
>>>>>
>>>>> Changes since v1:
>>>>> * Added a comment about the register information
>>>>> * Droped defconfig changes as disscussed
>>>>> * Collected various Reviewed-by, Tested-by and Acked-by tags
>>>>> * Added SYSCON-{RESET, POWEROFF} to select from Kconfig
>>>>>
>>>>> Alim Akhtar (6):
>>>>>    arm: dts: Add syscon-{reboot, poweroff} nodes for exynos3250 SoCs
>>>>>    arm: dts: Add syscon-{reboot, poweroff} nodes for exynos4
>>>>>    arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5
>>>>>    arm: dts: Add syscon-{reboot, poweroff} nodes for exynos5410 SoC
>>>>>    ARM: exynos: select POWER_RESET_SYSCON and
>>>>>      POWER_RESET_SYSCON_POWEROFF
>>>>>    ARM: EXYNOS: Remove code for restart and poweroff for exynos SoCs
>>>>>
>>>>>   arch/arm/boot/dts/exynos3250.dtsi |   14 ++++++++++++
>>>>>   arch/arm/boot/dts/exynos4.dtsi    |   14 ++++++++++++
>>>>>   arch/arm/boot/dts/exynos5.dtsi    |   14 ++++++++++++
>>>>>   arch/arm/boot/dts/exynos5410.dtsi |   14 ++++++++++++
>>>>>   arch/arm/mach-exynos/Kconfig      |    3 +++
>>>>>   arch/arm/mach-exynos/pmu.c        |   43 -------------------------------------
>>>>>   6 files changed, 59 insertions(+), 43 deletions(-)
>>>>>
>>>>
>>>> Hi Alim,
>>>>
>>>> I have installed your patch set above with git am on top of
>>>> 4.3.0-rc6-00108-gce1fad2 torvalds/linux of today
>>>> with make exynos_defconfig on Odroid U3.
>>>>
>>> which exynos soc Odroid U3 uses?
>>>
>> OK, I can see its uses exynos4412 and exynos4412-odroidu3.dts does
>> include exynos4.dtsi,
>> so these should have worked.
>>
>>>> "halt -p" worked (power 0.0W).
>>>> "reboot" got stuck at 0.5W.
>>>>
>>> reboot stuck mean system does not reboot any more?
>
> It freezes when going for reboot.
> Have to power off/on to boot again.
>
> Btw I use an mmc, not an sd-card.
> No other HW connected, just LAN-cable.
> Bootloader is u-boot v2015.10.
> o
Have checked on 4.3.0-rc6-00006-gd03c139e7e77, still works on peach boards.
Sorry I don't have Odroid U3 with me, may be Javier or Krzysztof might 
help here to check whats wrong. To me its looks more of a board specific 
issue for now.

>>> As far as I can see there in __no__ functional changes that my patch introduce.
>>> So ideally it should have work. My patches are based on the top on
>>> vanilla v4.3-rc5.
>>> (25cb62b Linux 4.3-rc5), can you check at this commit?
>
> Will try tomorrow.
>
>>>
>>> Will check with the commit mentioned by you tomorrow.
>>>
>>>>
>>>> Without your patch set reboot worked.
>>>>
>>>>
>>>> Thanks,
>>>> --
>>>> Markus Reichl
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>>>> the body of a message to majordomo at vger.kernel.org
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>>
>>>
>>>
>>> --
>>> Regards,
>>> Alim
>>
>>
>>
>>
> Thanks,
> --
> Markus
>



More information about the linux-arm-kernel mailing list