[PATCH 0/3] ARM: dts: Use IOPAD pinmux for IGEP boards

[Tony Lindgren]

* Javier Martinez Canillas <javier at osg.samsung.com> [151019 08:39]:
> Hello,
> 
> This series use the IOPAD pinmux macros for the remaining IGEP boards that
> still used the register offset instead of the physical address using these
> macros so the DTS matches what is in the Technical Reference Manual.
> 
> The changes are only cosmetic since they make the DTS easier to read but
> does not change functionality. I built tested and compared the binary DTB
> MD5 checksum and both matches before and after the series applied:
> 
> Before
> 
> d7a56205bdc54365d49d9a90dfe3fafb  am335x-base0033.dtb
> fa272fcdee65d7bf4c03bd5a6c5ec4fd  omap3-igep0020.dtb
> ba65bf74d8c6ea8e7bd8face17179e6e  omap3-igep0020-rev-f.dtb
> 
> After
> 
> d7a56205bdc54365d49d9a90dfe3fafb  am335x-base0033.dtb
> fa272fcdee65d7bf4c03bd5a6c5ec4fd  omap3-igep0020.dtb
> ba65bf74d8c6ea8e7bd8face17179e6e  omap3-igep0020-rev-f.dtb

Good idea to test the dtb checksums :)

Applying all into omap-for-v4.4/dt thanks.

Tony