[PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory

[Lokesh Vutla]

On Saturday 17 October 2015 12:53 AM, Tony Lindgren wrote:
> * Lokesh Vutla <a0131933 at ti.com> [151015 08:21]:

[..snip..]

>>>
> 
> 8< ----------------------From c37732f6cea23d15faaaaa357cf698833c03ce05 Mon Sep 17 00:00:00 2001
> Date: Fri, 16 Oct 2015 12:16:21 -0700
> Subject: [PATCH] ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
> 
> On boards with more than 2GB of RAM booting goes wrong with things not
> working and we're getting lots of l3 warnings:
> 
> WARNING: CPU: 0 PID: 1 at drivers/bus/omap_l3_noc.c:147
> l3_interrupt_handler+0x260/0x384()
> 44000000.ocp:L3 Custom Error: MASTER MMC6 TARGET DMM1 (Idle):
> Data Access in User mode during Functional access
> ...
> [<c044e158>] (scsi_add_host_with_dma) from [<c04705c8>]
> (ata_scsi_add_hosts+0x5c/0x18c)
> [<c04705c8>] (ata_scsi_add_hosts) from [<c046b13c>]
> (ata_host_register+0x150/0x2cc)
> [<c046b13c>] (ata_host_register) from [<c046b38c>]
> (ata_host_activate+0xd4/0x124)
> [<c046b38c>] (ata_host_activate) from [<c047f42c>]
> (ahci_host_activate+0x5c/0x194)
> [<c047f42c>] (ahci_host_activate) from [<c0480854>]
> (ahci_platform_init_host+0x1f0/0x3f0)
> [<c0480854>] (ahci_platform_init_host) from [<c047c9dc>]
> (ahci_probe+0x70/0x98)
> [<c047c9dc>] (ahci_probe) from [<c04220cc>]
> (platform_drv_probe+0x54/0xb4)
> 
> Let's fix the issue by enabling ZONE_DMA for LPAE. Note that we need to
> limit dma_zone_size to 2GB as the rest of the RAM is beyond the 4GB limit.
> 
> Let's also fix things for dra7 as done in similar patches in the TI tree
> by Lokesh Vutla <lokeshvutla at ti.com>.

Looks good to me.
Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Since there is a big hole with in the memory space, we might also need
to enable SPARSEMEM ?

Thanks and regards,
Lokesh

> 
> Signed-off-by: Tony Lindgren <tony at atomide.com>
> 
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -49,6 +49,7 @@ config SOC_OMAP5
>  	select OMAP_INTERCONNECT
>  	select OMAP_INTERCONNECT_BARRIER
>  	select PM_OPP if PM
> +	select ZONE_DMA if ARM_LPAE
>  
>  config SOC_AM33XX
>  	bool "TI AM33XX"
> @@ -78,6 +79,7 @@ config SOC_DRA7XX
>  	select OMAP_INTERCONNECT
>  	select OMAP_INTERCONNECT_BARRIER
>  	select PM_OPP if PM
> +	select ZONE_DMA if ARM_LPAE
>  
>  config ARCH_OMAP2PLUS
>  	bool
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -243,6 +243,9 @@ static const char *const omap5_boards_compat[] __initconst = {
>  };
>  
>  DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
> +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
> +	.dma_zone_size	= SZ_2G,
> +#endif
>  	.reserve	= omap_reserve,
>  	.smp		= smp_ops(omap4_smp_ops),
>  	.map_io		= omap5_map_io,
> @@ -288,6 +291,9 @@ static const char *const dra74x_boards_compat[] __initconst = {
>  };
>  
>  DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
> +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
> +	.dma_zone_size	= SZ_2G,
> +#endif
>  	.reserve	= omap_reserve,
>  	.smp		= smp_ops(omap4_smp_ops),
>  	.map_io		= dra7xx_map_io,
> @@ -308,6 +314,9 @@ static const char *const dra72x_boards_compat[] __initconst = {
>  };
>  
>  DT_MACHINE_START(DRA72X_DT, "Generic DRA72X (Flattened Device Tree)")
> +#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
> +	.dma_zone_size	= SZ_2G,
> +#endif
>  	.reserve	= omap_reserve,
>  	.map_io		= dra7xx_map_io,
>  	.init_early	= dra7xx_init_early,
>