[PATCH 7/7] ARM: EXYNOS: Remove code for restart and poweroff for exynos SoCs

[Alim Akhtar]

Hello Krzysztof,

On 10/19/2015 12:30 PM, Krzysztof Kozlowski wrote:
> On 19.10.2015 15:03, Alim Akhtar wrote:
>> Now we can use the generic syscon-{reboot/poweroff} drivers,
>> so we don't need special handling for reboot/poweroff in
>> exynos pmu driver. This patch remove the same.
>>
>> Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
>> ---
>>   arch/arm/mach-exynos/pmu.c |   43 -------------------------------------------
>>   1 file changed, 43 deletions(-)
>
> I think that removal of this stuff will effectively remove the
> restart/poweroff handlers from:
> 1. Other defconfigs, like multi_v7
> 2. Custom configs.
>
Well, I did have a plan to enable it on multi_v7
Not sure about other custom configs, if there are some, they should also 
enable it I feel.

> Previously this code was always compiled in for ARCH_EXYNOS. Now it is
> not so I am thinking about selecting necessary drivers from main exynos
> Kconfig symbol. That could be tricky though, because "select" should be
> used only for non-visible symbols.
>
Probably adding these to mach-exynos/Kconfig as a "select" will do.

> Any ideas how to solve that?
>
> Best regards,
> Krzysztof
>
>>
>> diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
>> index de68938ee6aa..393c04aa727e 100644
>> --- a/arch/arm/mach-exynos/pmu.c
>> +++ b/arch/arm/mach-exynos/pmu.c
>> @@ -14,9 +14,6 @@
>>   #include <linux/of_address.h>
>>   #include <linux/platform_device.h>
>>   #include <linux/delay.h>
>> -#include <linux/notifier.h>
>> -#include <linux/reboot.h>
>> -
>>
>>   #include "exynos-pmu.h"
>>   #include "regs-pmu.h"
>> @@ -681,23 +678,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = {
>>   	EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
>>   };
>>
>> -static void exynos_power_off(void)
>> -{
>> -	unsigned int tmp;
>> -
>> -	pr_info("Power down.\n");
>> -	tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
>> -	tmp ^= (1 << 8);
>> -	pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
>> -
>> -	/* Wait a little so we don't give a false warning below */
>> -	mdelay(100);
>> -
>> -	pr_err("Power down failed, please power off system manually.\n");
>> -	while (1)
>> -		;
>> -}
>> -
>>   static void exynos5420_powerdown_conf(enum sys_powerdown mode)
>>   {
>>   	u32 this_cluster;
>> @@ -875,14 +855,6 @@ static void exynos5420_pmu_init(void)
>>   	pr_info("EXYNOS5420 PMU initialized\n");
>>   }
>>
>> -static int pmu_restart_notify(struct notifier_block *this,
>> -		unsigned long code, void *unused)
>> -{
>> -	pmu_raw_writel(0x1, EXYNOS_SWRESET);
>> -
>> -	return NOTIFY_DONE;
>> -}
>> -
>>   static const struct exynos_pmu_data exynos3250_pmu_data = {
>>   	.pmu_config	= exynos3250_pmu_config,
>>   	.pmu_init	= exynos3250_pmu_init,
>> @@ -940,20 +912,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = {
>>   	{ /*sentinel*/ },
>>   };
>>
>> -/*
>> - * Exynos PMU restart notifier, handles restart functionality
>> - */
>> -static struct notifier_block pmu_restart_handler = {
>> -	.notifier_call = pmu_restart_notify,
>> -	.priority = 128,
>> -};
>> -
>>   static int exynos_pmu_probe(struct platform_device *pdev)
>>   {
>>   	const struct of_device_id *match;
>>   	struct device *dev = &pdev->dev;
>>   	struct resource *res;
>> -	int ret;
>>
>>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>   	pmu_base_addr = devm_ioremap_resource(dev, res);
>> @@ -978,12 +941,6 @@ static int exynos_pmu_probe(struct platform_device *pdev)
>>
>>   	platform_set_drvdata(pdev, pmu_context);
>>
>> -	ret = register_restart_handler(&pmu_restart_handler);
>> -	if (ret)
>> -		dev_warn(dev, "can't register restart handler err=%d\n", ret);
>> -
>> -	pm_power_off = exynos_power_off;
>> -
>>   	dev_dbg(dev, "Exynos PMU Driver probe done\n");
>>   	return 0;
>>   }
>>
>
>