[PATCH v2 2/4] mtd: nand: Allow MTD_NAND_BRCMNAND to be selected for ARM64

[Ray Jui]

This patch is the same. I thought it has already been merged by Brian?

On 10/16/2015 2:08 AM, Anup Patel wrote:
> The BRCM NAND driver can be re-used for Broadcom ARM64 SoCs hence
> this patch updates Kconfig to allow selection of MTD_NAND_BRCMNAND
> for ARM64.
> 
> Signed-off-by: Anup Patel <anup.patel at broadcom.com>
> Reviewed-by: Vikram Prakash <vikramp at broadcom.com>
> Reviewed-by: Ray Jui <rjui at broadcom.com>
> Reviewed-by: Pramod KUMAR <pramodku at broadcom.com>
> Reviewed-by: Scott Branden <sbranden at broadcom.com>
> ---
>  drivers/mtd/nand/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index 3324281..a1b5819 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -393,7 +393,7 @@ config MTD_NAND_GPMI_NAND
>  
>  config MTD_NAND_BRCMNAND
>  	tristate "Broadcom STB NAND controller"
> -	depends on ARM || MIPS
> +	depends on ARM || ARM64 || MIPS
>  	help
>  	  Enables the Broadcom NAND controller driver. The controller was
>  	  originally designed for Set-Top Box but is used on various BCM7xxx,
>