[PATCH 2/2] DT: nvmem: Add NXP LPC18xx EEPROM memory binding documentation

[Ariel D'Alessandro]

Add the devicetree binding document for NXP LPC18xx EEPROM memory.

Signed-off-by: Ariel D'Alessandro <ariel at vanguardiasur.com.ar>
---
 .../devicetree/bindings/nvmem/lpc18xx_eeprom.txt   | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/lpc18xx_eeprom.txt

diff --git a/Documentation/devicetree/bindings/nvmem/lpc18xx_eeprom.txt b/Documentation/devicetree/bindings/nvmem/lpc18xx_eeprom.txt
new file mode 100644
index 0000000..372ff8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/lpc18xx_eeprom.txt
@@ -0,0 +1,26 @@
+* NXP LPC18xx EEPROM memory NVMEM driver
+
+Required properties:
+  - compatible: Should be "nxp,lpc1850-eeprom"
+  - reg: Must contain an entry with the physical base address and length
+    for each entry in reg-names.
+  - reg-names: Must include the following entries.
+    - reg: EEPROM registers.
+    - mem: EEPROM address space.
+  - clocks: Must contain an entry for each entry in clock-names.
+  - clock-names: Must include the following entries.
+    - eeprom: EEPROM operating clock.
+  - interrupts: Should contain EEPROM interrupt.
+
+Example:
+
+  eeprom: eeprom at 4000e000 {
+    compatible = "nxp,lpc1850-eeprom";
+    reg = <0x4000e000 0x1000>,
+          <0x20040000 0x4000>;
+    reg-names = "reg", "mem";
+    clocks = <&ccu1 CLK_CPU_EEPROM>;
+    clock-names = "eeprom";
+    resets = <&rgu 27>;
+    interrupts = <4>;
+  };
-- 
2.6.1