[PATCH v2 1/4] arm64: dts: Reserve memory regions for hi6220

[Leo Yan]

Hi Rob,

On Tue, Oct 13, 2015 at 08:58:13AM +0800, Leo Yan wrote:
> On Hi6220, below memory regions in DDR have specific purpose:
> 
>   0x05e0,0000 - 0x05ef,ffff: For MCU firmware using at runtime;
>   0x06df,f000 - 0x06df,ffff: For mailbox message data;
>   0x0740,f000 - 0x0740,ffff: For MCU firmware's section;
>   0x3e00,0000 - 0x3fff,ffff: For OP-TEE.
> 
> This patch reserves these memory regions in DT.
> 
> Signed-off-by: Leo Yan <leo.yan at linaro.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> index e36a539..e3f4cb3 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> @@ -7,9 +7,6 @@
>  
>  /dts-v1/;
>  
> -/*Reserved 1MB memory for MCU*/
> -/memreserve/ 0x05e00000 0x00100000;
> -
>  #include "hi6220.dtsi"
>  
>  / {
> @@ -24,8 +21,19 @@
>  		stdout-path = "serial0:115200n8";
>  	};
>  
> +	/*
> +	 * Reserve below regions from memory node:
> +	 *
> +	 *  - 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
> +	 *  - 0x06df,f000 - 0x06df,ffff: Mailbox message data
> +	 *  - 0x0740,f000 - 0x0740,ffff: MCU firmware section
> +	 *  - 0x3e00,0000 - 0x3fff,ffff: OP-TEE
> +	 */
>  	memory at 0 {
>  		device_type = "memory";
> -		reg = <0x0 0x0 0x0 0x40000000>;
> +		reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
> +		      <0x00000000 0x05f00000 0x00000000 0x00eff000>,
> +		      <0x00000000 0x06e00000 0x00000000 0x0060f000>,
> +		      <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>  	};
>  };

Are you convinced by the before's patch arguments from Mark and I? i'd
like get green light from you.

Thanks,
Leo Yan

> -- 
> 1.9.1
>