[PATCH 3/6] mfd: axp20x: Add support for RSB based AXP223 PMIC

[Maxime Ripard]

On Thu, Oct 15, 2015 at 12:32:19AM +0800, Chen-Yu Tsai wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
> 
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  drivers/mfd/Kconfig        | 12 ++++++
>  drivers/mfd/Makefile       |  1 +
>  drivers/mfd/axp20x-core.c  |  2 +
>  drivers/mfd/axp20x-rsb.c   | 93 ++++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h |  1 +
>  5 files changed, 109 insertions(+)
>  create mode 100644 drivers/mfd/axp20x-rsb.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 9ba3feb3f2fc..6e5edb61d42e 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -84,6 +84,7 @@ config MFD_BCM590XX
>  config MFD_AXP20X
>  	bool "X-Powers AXP series PMICs"
>  	select MFD_AXP20X_I2C
> +	select MFD_AXP20X_RSB
>  
>  config MFD_AXP20X_CORE
>  	bool
> @@ -102,6 +103,17 @@ config MFD_AXP20X_I2C
>  	  components like regulators or the PEK (Power Enable Key) under the
>  	  corresponding menus.
>  
> +config MFD_AXP20X_RSB
> +	bool "X-Powers AXP series RSB PMICs"
> +	select MFD_AXP20X_CORE
> +	depends on SUNXI_RSB=y

Do we need that? Even if the bus is compiled as a module, the driver
will not be probed before that, will it?

> +	help
> +	  If you say Y here you get support for the X-Powers AXP series RSB
> +	  based power management ICs (PMICs).
> +	  This driver include only the core APIs. You have to select individual
> +	  components like regulators or the PEK (Power Enable Key) under the
> +	  corresponding menus.
> +
>  config MFD_CROS_EC
>  	tristate "ChromeOS Embedded Controller"
>  	select MFD_CORE
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index ce3ad5fd4e2f..1eb278619dd6 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -108,6 +108,7 @@ obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
>  obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
>  obj-$(CONFIG_MFD_AXP20X_CORE)	+= axp20x-core.o
>  obj-$(CONFIG_MFD_AXP20X_I2C)	+= axp20x-i2c.o
> +obj-$(CONFIG_MFD_AXP20X_RSB)	+= axp20x-rsb.o
>  
>  obj-$(CONFIG_MFD_LP3943)	+= lp3943.o
>  obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o
> diff --git a/drivers/mfd/axp20x-core.c b/drivers/mfd/axp20x-core.c
> index dd33548d93c4..baecccb6d400 100644
> --- a/drivers/mfd/axp20x-core.c
> +++ b/drivers/mfd/axp20x-core.c
> @@ -32,6 +32,7 @@ static const char * const axp20x_model_names[] = {
>  	"AXP202",
>  	"AXP209",
>  	"AXP221",
> +	"AXP223",
>  	"AXP288",
>  };
>  
> @@ -575,6 +576,7 @@ int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
>  		axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
>  		break;
>  	case AXP221_ID:
> +	case AXP223_ID:
>  		axp20x->nr_cells = ARRAY_SIZE(axp22x_cells);
>  		axp20x->cells = axp22x_cells;
>  		axp20x->regmap_cfg = &axp22x_regmap_config;
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> new file mode 100644
> index 000000000000..5d053d177717
> --- /dev/null
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -0,0 +1,93 @@
> +/*
> + * axp20x-rsb.c - RSB driver for the X-Powers' Power Management ICs
> + *
> + * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
> + * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
> + * as well as configurable GPIOs.
> + *
> + * This driver supports the RSB variants.
> + *
> + * Author: Chen-Yu Tsai <wens at csie.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/soc/sunxi/sunxi_rsb.h>
> +
> +static const struct of_device_id axp20x_sunxi_rsb_of_match[] = {
> +	{ .compatible = "x-powers,axp223", .data = (void *) AXP223_ID },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_sunxi_rsb_of_match);
> +
> +static int axp20x_sunxi_rsb_match_device(struct axp20x_dev *axp20x,
> +					 struct device *dev)
> +{
> +	const struct of_device_id *of_id;
> +
> +	of_id = of_match_device(axp20x_sunxi_rsb_of_match, dev);
> +	if (!of_id) {
> +		dev_err(dev, "Unable to match OF ID\n");
> +		return -ENODEV;
> +	}
> +	axp20x->variant = (long) of_id->data;
> +
> +	return axp20x_match_device(axp20x, dev);
> +}
> +
> +static int axp20x_sunxi_rsb_probe(struct sunxi_rsb_device *rdev)
> +{
> +	struct axp20x_dev *axp20x;
> +	int ret;
> +
> +	axp20x = devm_kzalloc(&rdev->dev, sizeof(*axp20x), GFP_KERNEL);
> +	if (!axp20x)
> +		return -ENOMEM;
> +
> +	ret = axp20x_sunxi_rsb_match_device(axp20x, &rdev->dev);
> +	if (ret)
> +		return ret;
> +
> +	axp20x->dev = &rdev->dev;
> +	axp20x->irq = rdev->irq;
> +	sunxi_rsb_device_set_drvdata(rdev, axp20x);
> +
> +	axp20x->regmap = devm_regmap_init_sunxi_rsb(rdev, axp20x->regmap_cfg);
> +	if (IS_ERR(axp20x->regmap)) {
> +		ret = PTR_ERR(axp20x->regmap);
> +		dev_err(&rdev->dev, "regmap init failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	return axp20x_device_probe(axp20x);
> +}
> +
> +static int axp20x_sunxi_rsb_remove(struct sunxi_rsb_device *rdev)
> +{
> +	struct axp20x_dev *axp20x = sunxi_rsb_device_get_drvdata(rdev);
> +
> +	return axp20x_device_remove(axp20x);
> +}
> +
> +static struct sunxi_rsb_driver axp20x_sunxi_rsb_driver = {
> +	.driver = {
> +		.name	= "axp20x-sunxi-rsb",

Do we need to be that verbose in the name of the driver?

axp20x-rsb should be enough, especially since it's also the name of
your file.

Looks good otherwise, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151016/42cc5aa7/attachment-0001.sig>