[PATCH v3 00/20] KVM: ARM64: Add guest PMU support
Wei Huang
wei at redhat.com
Thu Oct 15 21:55:23 PDT 2015
On 09/24/2015 05:31 PM, Shannon Zhao wrote:
> This patchset adds guest PMU support for KVM on ARM64. It takes
> trap-and-emulate approach. When guest wants to monitor one event, it
> will be trapped by KVM and KVM will call perf_event API to create a perf
> event and call relevant perf_event APIs to get the count value of event.
>
> Use perf to test this patchset in guest. When using "perf list", it
> shows the list of the hardware events and hardware cache events perf
> supports. Then use "perf stat -e EVENT" to monitor some event. For
> example, use "perf stat -e cycles" to count cpu cycles and
> "perf stat -e cache-misses" to count cache misses.
>
> Below are the outputs of "perf stat -r 5 sleep 5" when running in host
> and guest.
>
> Host:
> Performance counter stats for 'sleep 5' (5 runs):
>
> 0.551428 task-clock (msec) # 0.000 CPUs utilized ( +- 0.91% )
> 1 context-switches # 0.002 M/sec
> 0 cpu-migrations # 0.000 K/sec
> 48 page-faults # 0.088 M/sec ( +- 1.05% )
> 1150265 cycles # 2.086 GHz ( +- 0.92% )
> <not supported> stalled-cycles-frontend
> <not supported> stalled-cycles-backend
> 526398 instructions # 0.46 insns per cycle ( +- 0.89% )
> <not supported> branches
> 9485 branch-misses # 17.201 M/sec ( +- 2.35% )
>
> 5.000831616 seconds time elapsed ( +- 0.00% )
>
> Guest:
> Performance counter stats for 'sleep 5' (5 runs):
>
> 0.730868 task-clock (msec) # 0.000 CPUs utilized ( +- 1.13% )
> 1 context-switches # 0.001 M/sec
> 0 cpu-migrations # 0.000 K/sec
> 48 page-faults # 0.065 M/sec ( +- 0.42% )
> 1642982 cycles # 2.248 GHz ( +- 1.04% )
> <not supported> stalled-cycles-frontend
> <not supported> stalled-cycles-backend
> 637964 instructions # 0.39 insns per cycle ( +- 0.65% )
> <not supported> branches
> 10377 branch-misses # 14.198 M/sec ( +- 1.09% )
>
> 5.001289068 seconds time elapsed ( +- 0.00% )
>
Thanks for V3. One suggestion is to run more perf stress tests, such as
"perf test". So we know the corner cases are covered as much as possible.
> This patchset can be fetched from [1] and the relevant QEMU version for
> test can be fetched from [2].
>
> Thanks,
> Shannon
>
> [1] https://git.linaro.org/people/shannon.zhao/linux-mainline.git KVM_ARM64_PMU_v3
> [2] https://git.linaro.org/people/shannon.zhao/qemu.git PMU_v2
>
> Changes since v2->v3:
> * Directly use perf raw event type to create perf_event in KVM
> * Add a helper vcpu_sysreg_write
> * remove unrelated header file
>
> Changes since v1->v2:
> * Use switch...case for registers access handler instead of adding
> alone handler for each register
> * Try to use the sys_regs to store the register value instead of adding
> new variables in struct kvm_pmc
> * Fix the handle of cp15 regs
> * Create a new kvm device vPMU, then userspace could choose whether to
> create PMU
> * Fix the handle of PMU overflow interrupt
>
> Shannon Zhao (20):
> ARM64: Move PMU register related defines to asm/pmu.h
> KVM: ARM64: Define PMU data structure for each vcpu
> KVM: ARM64: Add offset defines for PMU registers
> KVM: ARM64: Add reset and access handlers for PMCR_EL0 register
> KVM: ARM64: Add reset and access handlers for PMSELR register
> KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1
> register
> KVM: ARM64: PMU: Add perf event map and introduce perf event creating
> function
> KVM: ARM64: Add reset and access handlers for PMXEVTYPER register
> KVM: ARM64: Add reset and access handlers for PMXEVCNTR register
> KVM: ARM64: Add reset and access handlers for PMCCNTR register
> KVM: ARM64: Add reset and access handlers for PMCNTENSET and
> PMCNTENCLR register
> KVM: ARM64: Add reset and access handlers for PMINTENSET and
> PMINTENCLR register
> KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR
> register
> KVM: ARM64: Add reset and access handlers for PMUSERENR register
> KVM: ARM64: Add reset and access handlers for PMSWINC register
> KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register
> KVM: ARM64: Add PMU overflow interrupt routing
> KVM: ARM64: Reset PMU state when resetting vcpu
> KVM: ARM64: Free perf event of PMU when destroying vcpu
> KVM: ARM64: Add a new kvm ARM PMU device
>
> Documentation/virtual/kvm/devices/arm-pmu.txt | 15 +
> arch/arm/kvm/arm.c | 5 +
> arch/arm64/include/asm/kvm_asm.h | 59 +++-
> arch/arm64/include/asm/kvm_host.h | 2 +
> arch/arm64/include/asm/pmu.h | 47 +++
> arch/arm64/include/uapi/asm/kvm.h | 3 +
> arch/arm64/kernel/perf_event.c | 35 --
> arch/arm64/kvm/Kconfig | 8 +
> arch/arm64/kvm/Makefile | 1 +
> arch/arm64/kvm/reset.c | 3 +
> arch/arm64/kvm/sys_regs.c | 488 ++++++++++++++++++++++++--
> arch/arm64/kvm/sys_regs.h | 16 +
> include/kvm/arm_pmu.h | 65 ++++
> include/linux/kvm_host.h | 1 +
> include/uapi/linux/kvm.h | 2 +
> virt/kvm/arm/pmu.c | 414 ++++++++++++++++++++++
> virt/kvm/kvm_main.c | 4 +
> 17 files changed, 1098 insertions(+), 70 deletions(-)
> create mode 100644 Documentation/virtual/kvm/devices/arm-pmu.txt
> create mode 100644 include/kvm/arm_pmu.h
> create mode 100644 virt/kvm/arm/pmu.c
>
More information about the linux-arm-kernel
mailing list