[PATCH RFT] ARM: bcm2835: enable all bcm2835-relevant in defconfig

[Stefan Wahren]

Rebuild bcm2835_defconfig using "make bcm2835_defconfig;
make savedefconfig", and add the following features:

* Enable all bcm2835-relevant drivers (MBOX, WDT, DMA,
  PWM, SND)
* Re-enable some features to keep the current settings
  (stackprotector, LED GPIO, LED triggers)

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 arch/arm/configs/bcm2835_defconfig |   28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

This patch is only compile-tested.

diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig
index 31cb073..0fda844 100644
--- a/arch/arm/configs/bcm2835_defconfig
+++ b/arch/arm/configs/bcm2835_defconfig
@@ -10,7 +10,6 @@ CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_PERF=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
@@ -18,10 +17,6 @@ CONFIG_NAMESPACES=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_XZ=y
-CONFIG_RD_LZO=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
@@ -29,6 +24,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_JUMP_LABEL=y
+CONFIG_CC_STACKPROTECTOR_REGULAR=y
 CONFIG_ARCH_MULTI_V6=y
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_BCM=y
@@ -38,7 +34,6 @@ CONFIG_AEABI=y
 CONFIG_KSM=y
 CONFIG_CLEANCACHE=y
 CONFIG_SECCOMP=y
-CONFIG_CC_STACKPROTECTOR=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 CONFIG_VFP=y
@@ -57,7 +52,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 # CONFIG_STANDALONE is not set
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_NETDEVICES=y
@@ -77,17 +71,27 @@ CONFIG_SPI=y
 CONFIG_SPI_BCM2835=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
 CONFIG_FB=y
 CONFIG_FB_SIMPLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC2=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_BCM2835=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
@@ -96,17 +100,19 @@ CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=y
 CONFIG_STAGING=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
+CONFIG_MAILBOX=y
+CONFIG_BCM2835_MBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_FANOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-- 
1.7.10.4