[PATCH V1 10/10] acpi, gicv3, its: Use MADT ITS subtable to do PCI/MSI domain initialization.

Tomasz Nowicki tn at semihalf.com
Thu Oct 15 07:05:19 PDT 2015


After refactoring DT code, we let ACPI to build ITS PCI MSI domain
and do requester ID to device ID translation using IORT table.

We have now full PCI MSI domain stack, thus we can enable ITS initialization
from GICv3 core driver for ACPI scenario.

Signed-off-by: Tomasz Nowicki <tn at semihalf.com>
---
 drivers/irqchip/irq-gic-v3-its-pci-msi.c | 48 ++++++++++++++++++++++++++++++--
 drivers/irqchip/irq-gic-v3.c             |  3 +-
 2 files changed, 47 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
index cfd35da..09ae2d8 100644
--- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c
+++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c
@@ -15,6 +15,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/acpi.h>
+#include <linux/iort.h>
 #include <linux/msi.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -59,8 +61,10 @@ static int its_pci_msi_vec_count(struct pci_dev *pdev)
 static int its_get_pci_alias(struct pci_dev *pdev, u16 alias, void *data)
 {
 	struct its_pci_alias *dev_alias = data;
+	u32 dev_id;
 
-	dev_alias->dev_id = alias;
+	dev_alias->dev_id = iort_find_pci_id(pdev, alias, &dev_id) == 0 ?
+								dev_id : alias;
 	if (pdev != dev_alias->pdev)
 		dev_alias->count += its_pci_msi_vec_count(pdev);
 
@@ -145,10 +149,50 @@ static int __init its_pci_of_msi_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI
+
+static int __init
+its_pci_msi_parse_madt(struct acpi_subtable_header *header,
+		    const unsigned long end)
+{
+	struct acpi_madt_generic_translator *its_entry;
+	struct fwnode_handle *domain_handle;
+
+	its_entry = (struct acpi_madt_generic_translator *)header;
+	domain_handle = iort_find_its_domain_token(its_entry->translation_id);
+	if (!domain_handle) {
+		pr_err("ITS at 0x%lx: Unable to locate ITS domain handle\n",
+		       (long)its_entry->base_address);
+		return 0;
+	}
+
+	if (its_pci_msi_init_one(domain_handle))
+		return 0;
+
+	pci_msi_register_fwnode_provider(&iort_find_pci_domain_token);
+	pr_info("PCI/MSI: ITS at 0x%lx domain created\n",
+		(long)its_entry->base_address);
+	return 0;
+}
+
+static int __init its_pci_acpi_msi_init(void)
+{
+	acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR,
+			      its_pci_msi_parse_madt, 0);
+	return 0;
+}
+#else
+inline static int __init its_pci_acpi_msi_init(void)
+{
+	return 0;
+}
+#endif
+
 static int __init its_pci_msi_init(void)
 {
 	its_pci_of_msi_init();
+	its_pci_acpi_msi_init();
+
 	return 0;
 }
-
 early_initcall(its_pci_msi_init);
diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
index 27a6b79..b498947 100644
--- a/drivers/irqchip/irq-gic-v3.c
+++ b/drivers/irqchip/irq-gic-v3.c
@@ -894,8 +894,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
 
 	set_handle_irq(gic_handle_irq);
 
-	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() &&
-	    to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */
+	if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis())
 		its_init(handle, &gic_data.rdists, gic_data.domain);
 
 	gic_smp_init();
-- 
1.9.1




More information about the linux-arm-kernel mailing list