[PATCH V3 4/6] arm64/ls1043a: add DTS for Freescale LS1043A SoC

[Scott Wood]

On Wed, 2015-10-14 at 19:34 +0800, Zhiqiang Hou wrote:
> From: Mingkai Hu <Mingkai.Hu at freescale.com>
> 
> LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
> similar to LS1021a which complies to Chassis 2.1 spec.
> 
> Following levels of DTSI/DTS files have been created for the
> LS1043A SoC family:
> 
> - fsl-ls1043a.dtsi:
>   DTS-Include file for FSL LS1043A SoC.
> 
> Signed-off-by: Li Yang <leoli at freescale.com>
> Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
> Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> Signed-off-by: Wenbin Song <Wenbin.Song at freescale.com>
> ---
> V3:
>  - Add device tree node for SATA.
>  - Remove properity enable-method for all cpu node.
>    Remove reserved memory region for spin-table.
> 
> V2:
>  - Add secondary core boot method.
>  - Move out the sysclk node from the clockgen node.
>  - Correct the reg size of GICC.
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 513 
> +++++++++++++++++++++++++
>  1 file changed, 513 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

On the ls208x device tree we were asked to put devices under a bus node, such 
as an soc node with a simple-bus compatible.

-Scott