linux-next: manual merge of the mfd tree with the arm-soc tree

Stephen Rothwell sfr at canb.auug.org.au
Wed Oct 14 19:19:11 PDT 2015


Hi Lee,

Today's linux-next merge of the mfd tree got a conflict in:

  Documentation/devicetree/bindings/mfd/s2mps11.txt

between commit:

  6a4479f96543 ("dt-bindings: Document grounded ACOKB pin on S2MPS11")

from the arm-soc tree and commit:

  db96ec728d69 ("mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X")

from the mfd tree.

I fixed it up (see below) and can carry the fix as necessary (no action
is required).

-- 
Cheers,
Stephen Rothwell                    sfr at canb.auug.org.au

diff --cc Documentation/devicetree/bindings/mfd/s2mps11.txt
index 90eaef393325,a0bc753955c2..000000000000
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@@ -15,10 -15,9 +15,13 @@@ Optional properties
  - interrupt-parent: Specifies the phandle of the interrupt controller to which
    the interrupts from s2mps11 are delivered to.
  - interrupts: Interrupt specifiers for interrupt sources.
 +- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
 +  connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
 +  register to turn off the power. Usually the ACOKB is pulled up to VBATT so
 +  when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
+ - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+   down. When the system is suspended it will always go down thus triggerring
+   unwanted buck warm reset (setting buck voltages to default values).
  
  Optional nodes:
  - clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768



More information about the linux-arm-kernel mailing list