[PATCH 5/5] media: atmel-isi: support RGB565 output when sensor output YUV formats

[Josh Wu]

Dear Guennadi,

Thanks for the review.

On 10/5/2015 1:02 AM, Guennadi Liakhovetski wrote:
> On Tue, 22 Sep 2015, Josh Wu wrote:
>
>> This patch enable Atmel ISI preview path to convert the YUV to RGB format.
>>
>> Signed-off-by: Josh Wu <josh.wu at atmel.com>
>> ---
>>
>>   drivers/media/platform/soc_camera/atmel-isi.c | 38 ++++++++++++++++++++-------
>>   1 file changed, 29 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
>> index e87d354..e33a16a 100644
>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>> @@ -201,13 +201,20 @@ static bool is_supported(struct soc_camera_device *icd,
>>   	case V4L2_PIX_FMT_UYVY:
>>   	case V4L2_PIX_FMT_YVYU:
>>   	case V4L2_PIX_FMT_VYUY:
>> +	/* RGB */
>> +	case V4L2_PIX_FMT_RGB565:
>>   		return true;
>> -	/* RGB, TODO */
>>   	default:
>>   		return false;
>>   	}
>>   }
>>   
>> +static bool is_output_rgb(const struct soc_mbus_pixelfmt *host_fmt)
>> +{
>> +	return host_fmt->fourcc == V4L2_PIX_FMT_RGB565 ||
>> +			host_fmt->fourcc == V4L2_PIX_FMT_RGB32;
>> +}
>> +
> Why not just pass fourcc to this function? Or maybe just embed it in
> start_streaming - it won't clutter it a lot.

I think pass fourcc to the function is good.
Since configure_geometry() is hardware related, and the 
enable_preview_path is also hardware related, so I prefer initialize 
enable_preview_path in configure_geometry().

>
>>   static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi)
>>   {
>>   	if (isi->active) {
>> @@ -467,6 +474,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
>>   	struct atmel_isi *isi = ici->priv;
>>   	int ret;
>>   
>> +	isi->enable_preview_path = is_output_rgb(icd->current_fmt->host_fmt);
>> +
>>   	pm_runtime_get_sync(ici->v4l2_dev.dev);
>>   
>>   	/* Reset ISI */
>> @@ -688,6 +697,14 @@ static const struct soc_mbus_pixelfmt isi_camera_formats[] = {
>>   		.order			= SOC_MBUS_ORDER_LE,
>>   		.layout			= SOC_MBUS_LAYOUT_PACKED,
>>   	},
>> +	{
>> +		.fourcc			= V4L2_PIX_FMT_RGB565,
>> +		.name			= "RGB565",
>> +		.bits_per_sample	= 8,
>> +		.packing		= SOC_MBUS_PACKING_2X8_PADHI,
>> +		.order			= SOC_MBUS_ORDER_LE,
>> +		.layout			= SOC_MBUS_LAYOUT_PACKED,
>> +	},
>>   };
>>   
>>   /* This will be corrected as we get more formats */
>> @@ -744,7 +761,7 @@ static int isi_camera_get_formats(struct soc_camera_device *icd,
>>   				  struct soc_camera_format_xlate *xlate)
>>   {
>>   	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
>> -	int formats = 0, ret;
>> +	int formats = 0, ret, i, n;
>>   	/* sensor format */
>>   	struct v4l2_subdev_mbus_code_enum code = {
>>   		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>> @@ -778,13 +795,16 @@ static int isi_camera_get_formats(struct soc_camera_device *icd,
>>   	case MEDIA_BUS_FMT_VYUY8_2X8:
>>   	case MEDIA_BUS_FMT_YUYV8_2X8:
>>   	case MEDIA_BUS_FMT_YVYU8_2X8:
>> -		formats++;
>> -		if (xlate) {
>> -			xlate->host_fmt	= &isi_camera_formats[0];
>> -			xlate->code	= code.code;
>> -			xlate++;
>> -			dev_dbg(icd->parent, "Providing format %s using code %d\n",
>> -				isi_camera_formats[0].name, code.code);
>> +		n = ARRAY_SIZE(isi_camera_formats);
>> +		formats += n;
>> +		for (i = 0; i < n; i++) {
>> +			if (xlate) {
> I'd put if outside of the loop, or just do
>
> +		for (i = 0; xlate && i < n; i++) {

yes, that simpler one. I'll take it. Thanks.

Best Regards,
Josh Wu
>
>
>> +				xlate->host_fmt	= &isi_camera_formats[i];
>> +				xlate->code	= code.code;
>> +				dev_dbg(icd->parent, "Providing format %s using code %d\n",
>> +					isi_camera_formats[0].name, code.code);
>> +				xlate++;
>> +			}
>>   		}
>>   		break;
>>   	default:
>> -- 
>> 1.9.1
>>