[PATCH 4/5] media: atmel-isi: setup YCC_SWAP correctly when using preview path

[Josh Wu]

Hi, Dear Guennadi

On 10/5/2015 12:50 AM, Guennadi Liakhovetski wrote:
> On Tue, 22 Sep 2015, Josh Wu wrote:
>
>> The preview path only can convert UYVY format to RGB data.
>>
>> To make preview path work correctly, we need to set up YCC_SWAP
>> according to sensor output and convert them to UYVY.
>>
>> Signed-off-by: Josh Wu <josh.wu at atmel.com>
>> ---
>>
>>   drivers/media/platform/soc_camera/atmel-isi.c | 16 ++++++++++++++++
>>   1 file changed, 16 insertions(+)
>>
>> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
>> index bbf6449..e87d354 100644
>> --- a/drivers/media/platform/soc_camera/atmel-isi.c
>> +++ b/drivers/media/platform/soc_camera/atmel-isi.c
>> @@ -127,6 +127,22 @@ static u32 setup_cfg2_yuv_swap(struct atmel_isi *isi,
>>   			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_1;
>>   			break;
>>   		}
>> +	} else if (xlate->host_fmt->fourcc == V4L2_PIX_FMT_RGB565) {
>> +		/* Preview path is enabled, it will convert UYVY to RGB format.
>> +		 * But if sensor output format is not UYVY, we need to set
>> +		 * YCC_SWAP_MODE to convert it as UYVY.
>> +		 */
> Please, fix multiline comment style:
>
> 		/*
> 		 * ...
> 		 * ...
> 		 */
oh, yes, Sure. I'll fix this. Thanks.

Best Regards,
Josh Wu

>> +		switch (xlate->code) {
>> +		case MEDIA_BUS_FMT_VYUY8_2X8:
>> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_1;
>> +			break;
>> +		case MEDIA_BUS_FMT_YUYV8_2X8:
>> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_2;
>> +			break;
>> +		case MEDIA_BUS_FMT_YVYU8_2X8:
>> +			cfg2_yuv_swap = ISI_CFG2_YCC_SWAP_MODE_3;
>> +			break;
>> +		}
>>   	}
>>   
>>   	return cfg2_yuv_swap;
>> -- 
>> 1.9.1
>>