[PATCH 30/37] ARM: dts: omap3-beagle-xm: Fix regulator enable GPIO polarity

[Laurent Pinchart]

The enable GPIO is active low, but is flagged as active high in the gpio
property. As the gpio property flags are currently unused by the driver
this doesn't cause any issue for now, but will break later if the driver
starts making use of the flags. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Cc: linux-omap at vger.kernel.org
Cc: Benoit Cousson <bcousson at baylibre.com>
Cc: Tony Lindgren <tony at atomide.com>

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 7c4dca122a91..f44f17673061 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -80,7 +80,7 @@
 		regulator-name = "hsusb2_vbus";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* GPIO LEDA */
 		startup-delay-us = <70000>;
 	};
 
-- 
2.4.9