[PATCH 13/37] ARM: dts: exynos5250-arndale: Fix regulator enable GPIO polarity

[Laurent Pinchart]

The enable GPIO is active high, but is flagged as active low in the gpio
property. As the gpio property flags are currently unused by the driver
this doesn't cause any issue for now, but will break later if the driver
starts making use of the flags. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Sascha Hauer <kernel at pengutronix.de>

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7e728a1b5559..e8703f0568c9 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -90,7 +90,7 @@
 			regulator-name = "VDD_33ON_2.8V";
 			regulator-min-microvolt = <2800000>;
 			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
+			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
 
-- 
2.4.9