Run armv7 32 bit userspace on aarch64

[Shi, Yang]

On 10/10/2015 2:25 PM, Arnd Bergmann wrote:
> On Friday 09 October 2015 17:28:08 Shi, Yang wrote:
>> On 10/9/2015 3:32 PM, Shi, Yang wrote:
>>> On 10/8/2015 4:12 AM, Will Deacon wrote:
>>>> On Wed, Oct 07, 2015 at 03:46:57PM -0700, Shi, Yang wrote:
>>>>> I'm trying to run armv7 little endian userspace on qemu aarch64 with
>>>>> 4.1.x
>>>>> kernel. I was told by someone such usecase is valid and I have
>>>>> CONFIG_COMPAT
>>>>> enabled in my kernel.
>>>>>
>>>>> But, I ran into the below error. It looks the userspace application is
>>>>> trying to write a readonly page. I got the similar failure on arm vfp
>>>>> with
>>>>> Linaro images (4.1 kernel) too.
>>>>>
>>>>> Did anyone have tried it recently?
>>>>
>>>> -rc4 seems to be working fine with Debian Jessie armhf on my Juno boards.
>>>>
>>>> Do you have a good way of reproducing this with a mainline kernel?
>>>
>>> It seems a qemu's bug. I can get both ubuntu and openembedded userspace
>>> bootup on my LS2085 board with 4.1 kernel.
>>
>> Some new findings pointed me to another direction.
>>
>> I just tried to build OE userspace with gcc 5.2 (default toolchain in OE
>> now), it fails to boot up with the same error.
>>
>> Then I tried the below test on 4.1 kernel:
>>
>> Linaro OE userspace image (4.9 toolchain)       Failed
>> My OE build with 4.9.3 toolchain                Success
>> My OE build with 5.2 toolchain                  Failed
>> Ubuntu image                                    Success
>
> Does your kernel have 64KB pages enabled? If it does, most 32-bit user space
> won't run, except when building it with relatively new toolchains.

No, I just use the default 4KB pages, but is is using 48 bits VA. The 
below is my kernel config (kernel features section)

#
# Kernel Features
#

#
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_4K_PAGES=y
# CONFIG_ARM64_64K_PAGES is not set
# CONFIG_ARM64_VA_BITS_39 is not set
CONFIG_ARM64_VA_BITS_48=y
CONFIG_ARM64_VA_BITS=48
# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_SMP=y
# CONFIG_SCHED_MC is not set
# CONFIG_SCHED_SMT is not set
CONFIG_NR_CPUS=8
CONFIG_HOTPLUG_CPU=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ=100
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HW_PERF_EVENTS=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_NO_BOOTMEM=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_XEN is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_ARMV8_DEPRECATED=y
CONFIG_SWP_EMULATION=y
# CONFIG_CP15_BARRIER_EMULATION is not set
# CONFIG_SETEND_EMULATION is not set

#
# Boot options
#
CONFIG_CMDLINE="console=ttyAMA0"
# CONFIG_CMDLINE_FORCE is not set
CONFIG_EFI_STUB=y
CONFIG_EFI=y
CONFIG_DMI=y

#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y


And, I also checked my busybox build flags for both 4.9.3 and 5.2, 
actually, they are using the same flags:

arm-linux-gnueabi-gcc  -march=armv7-a -marm  -mthumb-interwork 
-mfloat-abi=softfp 
--sysroot=/home/yshi/workspace/test-4.1/qemuarma9/bitbake_build/tmp/sysroots/qemuarma9 
-Wp,-MD,archival/libarchive/.filter_accept_all.o.d   -std=gnu99 
-Iinclude -Ilibbb  -include include/autoconf.h -D_GNU_SOURCE -DNDEBUG 
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 
-D"BB_VER=KBUILD_STR(1.23.2)" -DBB_BT=AUTOCONF_TIMESTAMP  -Wall -Wshadow 
-Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter 
-Wunused-function -Wunused-value -Wmissing-prototypes 
-Wmissing-declarations -Wno-format-security 
-Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen 
-finline-limit=0 -fomit-frame-pointer -ffunction-sections 
-fdata-sections -fno-guess-branch-probability -funsigned-char 
-static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 
-falign-loops=1 -fno-unwind-tables -fno-asynchronous-unwind-tables -Os 
-O2 -pipe -g  -O2 -pipe -g   -D"KBUILD_STR(s)=#s" 
-D"KBUILD_BASENAME=KBUILD_STR(filter_accept_all)" 
-D"KBUILD_MODNAME=KBUILD_STR(filter_accept_all)" -c -o 
archival/libarchive/filter_accept_all.o 
archival/libarchive/filter_accept_all.c


Thanks,
Yang

>
> Try running with the default 4KB page size if that is the problem.
>
> 	Arnd
>