[PATCH v3 0/7] mmc: dw_mmc-rockchip: allow tuning using the clk-phase api

Heiko Stuebner heiko at sntech.de
Mon Oct 12 05:48:23 PDT 2015


This series resurrects and adapts some individual patches whose sum
enable the dw_mmc hosts on Rockchip socs to tune clock phases using
the generic phase api (rk3288 and following have this capability).

The changes to the original mmc-phase clocks are expanded by further
findings resulting from devices being used in the field.

Similarly the regulator handling changes do use the brand new
regulator_set_voltage_triplet call to allow specifying lower and upper
limits. One possible point of discussion are the two voltage ranges
that are tried for the 3.3V signal level. Trying to stay near vmmc
at first and only then opening the range to the full 2.7-3.6V.

This mainly circumvents a shortcoming of the regulator voltage
setting, in that even with regulator_set_voltage_triplet the regulator
framework will take the lowest possible voltage when the possible
voltages are below the target voltage. While it may be ideal to solve
this on the regulator side, I'm not seeing this appearing in the short
term, mainly because all regulator parts (including regulator drivers)
are keyed to selecting the lowest voltage from the range, while on the
mmc side we know which voltages may work and trying this in two steps
does not create to much overhead, as unsupported voltages are already
filtered out by the regulator_is_voltage_selected calls.

changes since v2:
- use host->ios.vdd to read vmmc from instead of requiring the vmmc
  regulator. Suggested by Ulf this makes the voltage setting still work
  even if only the vqmmc but not the vmmc regulator is supplied.
- add Acks from Jaehoon Chung to the dw_mmc parts
- drop first two clock patches that already got applied to the mmc tree

changes since v1:
- address comment from Jaehoon Chung and keep this local to Rockchip
  for the time being
- address comments from Ulf and Doug in making it more explicit
  that the two-step 3.3V voltage setting essentially works around
  a limitation of regulator_set_voltage_triplet

Alexandru M Stan (3):
  mmc: dw_mmc-rockchip: dt-binding: Add tuning related things
  mmc: dw_mmc-rockchip: MMC tuning with the clock phase framework
  ARM: dts: rockchip: Add drive/sample clocks for rk3288 dw_mmc devices

Douglas Anderson (2):
  mmc: core: Add mmc_regulator_set_vqmmc()
  mmc: dw_mmc: Use mmc_regulator_set_vqmmc in
    start_signal_voltage_switch

Heiko Stuebner (2):
  mmc: core: move ocr-bit to voltage translation into separate function
  ARM: dts: rockchip: add tuning related settings to veyron devices

 .../devicetree/bindings/mmc/rockchip-dw-mshc.txt   |  13 ++
 arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi         |   7 +-
 arch/arm/boot/dts/rk3288-veyron.dtsi               |   6 +
 arch/arm/boot/dts/rk3288.dtsi                      |  20 ++-
 drivers/mmc/core/core.c                            | 129 ++++++++++++++--
 drivers/mmc/host/dw_mmc-rockchip.c                 | 162 +++++++++++++++++++++
 drivers/mmc/host/dw_mmc.c                          |  17 +--
 include/linux/mmc/host.h                           |   7 +
 8 files changed, 325 insertions(+), 36 deletions(-)

-- 
2.6.1




More information about the linux-arm-kernel mailing list