[RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy)

[Krzysztof Kozlowski]

W dniu 10.10.2015 o 04:18, Kevin Hilman pisze:
> Hi Krzystof,
> 
> Krzysztof Kozlowski <k.kozlowski at samsung.com> writes:
> 
>> Introduction
>> ============
>> This patchset tries to fix probing of usb3503 on Arndale board
>> if the Samsung PHY driver is probed later (or built as a module).
>>
>> *The patchset was not tested on Arndale board.*
>> I don't have that board. Please test it and say if the usb3503 deferred probe
>> works fine and the issue is solved.
> 
> FYI... I built this series on top of  next-20151009 and using
> exynos_defconfig.  I booted it on my arndale, and I still don't see the
> networking come up.  Full boot log attached.

+cc Tyler

Kevin,
Thanks for testing but I am not sure if this boot failure is related to
the patch. I mean if the patch should fix this particular boot failure.
The board stopped to boot after enabling DWC2 and network USB gadget:
http://www.spinics.net/lists/linux-samsung-soc/msg47009.html

The boot log shows that usb3503 was probed but asix network adapter was
not. I wonder how these things are related to each other...

Nevertheless it would be difficult to debug the issue without the
Arndale board. :)

Best regards,
Krzysztof