[PATCH 1/9] drm: bridge/dw_hdmi-ahb-audio: add audio driver

Russell King - ARM Linux linux at arm.linux.org.uk
Fri Oct 9 09:00:36 PDT 2015


On Tue, Oct 06, 2015 at 05:25:16PM -0300, Fabio Estevam wrote:
> On Tue, Oct 6, 2015 at 3:54 PM, Russell King - ARM Linux
> <linux at arm.linux.org.uk> wrote:
> 
> > Make sure you have the ALSA config file, as alsalib won't get on
> > with dw-hdmi only accepting 24-bit audio without this.  A copy is
> > attached.  It also tells ALSA how to deal with multi-channel audio
> > as well.
> 
> Thanks, Russell!
> 
> Got audio to play on my HDMI TV :-)
> 
> For the entire series:
> 
> Tested-by: Fabio Estevam <fabio.estevam at freescale.com>

Just to confirm - that's for _all_ of these 8 patches, including the
changes to the ACR code in the last four patches, and you're happy that
I send all of these:

drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: replace CTS calculation for the ACR

-- 
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.



More information about the linux-arm-kernel mailing list