[PATCH 0/4] arm64: Juno: Add support for PCIe on R1 board

[Liviu Dudau]

Juno R1 board has a working PCIe host bridge that can be enabled and
configured by the firmware and made use of by Linux. For UEFI, the
Linaro releases contain firmware that configure the XpressRICH3 host
bridge correctly. For U-Boot based setups, one needs the patchset
posted here[1].

This patchset adds a quirk for setting the correct class to the host
bridge device and the device tree changes that enable PCIe on Juno R1.
We also update the defconfig to enable the generic PCI host bridge driver.

Best regards,
Liviu

1. http://lists.denx.de/pipermail/u-boot/2015-October/229669.html


Andrew Murray (1):
  pci: Add PLDA's XpressRICH3 PCIe host bridge PCI ID

Liviu Dudau (3):
  PCI: Add quirk for PLDA's XpressRICH3 host bridge class.
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  arm64: defconfig: Enable PCI generic host bridge by default

 arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++
 arch/arm64/configs/defconfig        |  1 +
 drivers/pci/quirks.c                | 10 ++++++++++
 include/linux/pci_ids.h             |  3 +++
 4 files changed, 34 insertions(+)

-- 
2.6.0