[PATCH 2/5] Documentation: add the binding file for Freescale imx7d ADC driver

[Rob Herring]

On Thu, Oct 8, 2015 at 5:59 AM, Haibo Chen <haibo.chen at freescale.com> wrote:
> The patch adds the binding file for Freescale imx7d ADC driver.
>
> Signed-off-by: Haibo Chen <haibo.chen at freescale.com>

Acked-by: Rob Herring <robh at kernel.org>

> ---
>  .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> new file mode 100644
> index 0000000..6b21fd27
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> @@ -0,0 +1,26 @@
> +Freescale imx7d ADC bindings
> +
> +The devicetree bingdings are for the nwe ADC driver written for
> +imx7d SoC.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7d-adc"
> +- reg: Offset and length of the register set for the ADC device
> +- interrupts: The interrupt number for the ADC device
> +- clocks: The root clock of the ADC controller
> +- clock-names: Must contain "adc", matching entry in the clocks property
> +- vref-supply: The regulator supply ADC reference voltage
> +
> +Optional properties:
> +- num-channels: the number of channels used
> +
> +Example:
> +adc1: adc at 30610000 {
> +       compatible = "fsl,imx7d-adc";
> +       reg = <0x30610000 0x10000>;
> +       interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +       clocks = <&clks IMX7D_ADC_ROOT_CLK>;
> +       clock-names = "adc";
> +       num-channels = <4>;
> +       vref-supply = <&reg_vcc_3v3_mcu>;
> +};
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html