[PATCH 1/5] thermal: exynos: Fix unbalanced regulator disable on probe failure

[Krzysztof Kozlowski]

W dniu 09.10.2015 o 01:45, Alim Akhtar pisze:
> Hello,
> 
> On Thu, Oct 8, 2015 at 11:04 AM, Krzysztof Kozlowski
> <k.kozlowski at samsung.com> wrote:
>> During probe if the regulator could not be enabled, the error exit path
>> would still disable it. This could lead to unbalanced counter of
>> regulator enable/disable.
>>
> Do you see a regulator unbalanced reported here during boot? You may
> want to add that to commit message.

I did not see the warning/error message about unbalanced disable. It
would happen in certain condition only - no other enables of regulator
and count going below 0.

I would have to simulate this error to get the warning message. I don't
think it is worth the effort.

Best regards,
Krzysztof

> 
>> The patch moves code for getting and enabling the regulator from
>> exynos_map_dt_data() to probe function because it is really not a part
>> of getting Device Tree properties.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>> Fixes: 5f09a5cbd14a ("thermal: exynos: Disable the regulator on probe failure")
>> Cc: <stable at vger.kernel.org>
>> ---
>>  drivers/thermal/samsung/exynos_tmu.c | 34 +++++++++++++++++-----------------
>>  1 file changed, 17 insertions(+), 17 deletions(-)
>>
>> diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
>> index 0bae8cc6c23a..23f4320f8ef7 100644
>> --- a/drivers/thermal/samsung/exynos_tmu.c
>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>> @@ -1168,27 +1168,10 @@ static int exynos_map_dt_data(struct platform_device *pdev)
>>         struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>         struct exynos_tmu_platform_data *pdata;
>>         struct resource res;
>> -       int ret;
>>
>>         if (!data || !pdev->dev.of_node)
>>                 return -ENODEV;
>>
>> -       /*
>> -        * Try enabling the regulator if found
>> -        * TODO: Add regulator as an SOC feature, so that regulator enable
>> -        * is a compulsory call.
>> -        */
>> -       data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
>> -       if (!IS_ERR(data->regulator)) {
>> -               ret = regulator_enable(data->regulator);
>> -               if (ret) {
>> -                       dev_err(&pdev->dev, "failed to enable vtmu\n");
>> -                       return ret;
>> -               }
>> -       } else {
>> -               dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
>> -       }
>> -
>>         data->id = of_alias_get_id(pdev->dev.of_node, "tmuctrl");
>>         if (data->id < 0)
>>                 data->id = 0;
>> @@ -1312,6 +1295,23 @@ static int exynos_tmu_probe(struct platform_device *pdev)
>>                 pr_err("thermal: tz: %p ERROR\n", data->tzd);
>>                 return PTR_ERR(data->tzd);
>>         }
>> +
>> +       /*
>> +        * Try enabling the regulator if found
>> +        * TODO: Add regulator as an SOC feature, so that regulator enable
>> +        * is a compulsory call.
>> +        */
>> +       data->regulator = devm_regulator_get(&pdev->dev, "vtmu");
>> +       if (!IS_ERR(data->regulator)) {
>> +               ret = regulator_enable(data->regulator);
>> +               if (ret) {
>> +                       dev_err(&pdev->dev, "failed to enable vtmu\n");
>> +                       return ret;
>> +               }
>> +       } else {
>> +               dev_info(&pdev->dev, "Regulator node (vtmu) not found\n");
>> +       }
>> +
>>         ret = exynos_map_dt_data(pdev);
>>         if (ret)
>>                 goto err_sensor;
>> --
>> 1.9.1
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 
> 
>