[PATCH v4 6/6] arm64: dts: berlin4ct: add default pinmux for uart0

[Jisheng Zhang]

Add urt0 txd and rxd muxing setup in the dtsi because uart0 always uses
them to work, no other possibilities.

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index 8e66355..a4a1876 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -288,12 +288,19 @@
 				clocks = <&osc>;
 				reg-shift = <2>;
 				status = "disabled";
+				pinctrl-0 = <&uart0_pmux>;
+				pinctrl-names = "default";
 			};
 		};
 
 		system_pinctrl: pin-controller at fe2200 {
 			compatible = "marvell,berlin4ct-system-pinctrl";
 			reg = <0xfe2200 0xc>;
+
+			uart0_pmux: uart0-pmux {
+				groups = "SM_URT0_TXD", "SM_URT0_RXD";
+				function = "uart0";
+			};
 		};
 	};
 };
-- 
2.6.1