[PATCH 4/8] regulator: Hi655x: Add support for Hi655x regulator

[wangfei]

On 2015/10/1 1:58, Mark Brown wrote:
> On Wed, Sep 30, 2015 at 07:05:07PM +0800, Fei Wang wrote:
> 
>> +config REGULATOR_HI655X
>> +        tristate "Hisilicon HI655X PMIC regulators support"
>> +        depends on ARCH_HISI
>> +	depends on MFD_HI655X_PMIC && OF
> 
> You've got some tab/space confusion above.  Also, can't we have an ||
> COMPILE_TEST here?
> 
OK, i will add it.
>> +#define REG_VALUE_SETBITS(reg_value, pos, bits, bits_value) \
>> +		(reg_value = (reg_value & \
>> +		~((((unsigned int)1 << bits) - 1) << pos)) | \
>> +		((unsigned int)(bits_value & \
>> +		(((unsigned int)1 << bits) - 1)) << pos))
>> +
>> +#define REG_VALUE_GETBITS(reg_value, pos, bits) \
>> +			((reg_value >> pos) & (((unsigned int)1 << bits) - 1))
> 
> These are just really hard to read, sorry, and they appear to duplicate
> existing regmap functionality.  If there is a strong reason to add them
> consider doing so in the core and if you can then please at least make
> them regular inline functions rather than using macros.  It's much safer
> and more readable.
> 
i agree with you ，i will refactor all the unreadable code。
>> +static int hi655x_regulator_pmic_is_enabled(struct regulator_dev *rdev)
>> +{
>> +	int ret = 0;
>> +	unsigned int value = 0;
>> +
>> +	struct hi655x_regulator *sreg = rdev_get_drvdata(rdev);
>> +	struct hi655x_regulator_ctrl_regs  *ctrl_regs = &(sreg->ctrl_regs);
>> +	struct hi655x_regulator_ctrl_data  *ctrl_data = &(sreg->ctrl_data);
>> +
>> +	/*
>> +	* regulator is all set,but the pmu is only subset.
>> +	* maybe this "buck"/"ldo"/"lvs" is not contrl by a core.
>> +	* and in regulator have a "status" member ("okey" or "disable").
>> +	*/
> 
> I'm having a hard time parsing the above comment.  Please also use the
> normal kernel comment style (this is a problem throughout the driver).
> 
OK. i will modify all of these。
>> +	regmap_read(rdev->regmap, ctrl_regs->status_reg, &value);
>> +	ret = (int)REG_VALUE_GETBITS(value, ctrl_data->shift,
>> +					ctrl_data->mask);
> 
> This appears to just duplicate regulator core functionality for reading
> enable state from a bitfield?  Also note that the cast here isn't a
> great advert for the macros above.
> 
>> +static int hi655x_regulator_pmic_enable(struct regulator_dev *rdev)
>> +{
>> +	int ret = 0;
>> +	unsigned char value_u8 = 0;
>> +	unsigned int value_u32 = 0;
>> +	struct hi655x_regulator *sreg = rdev_get_drvdata(rdev);
>> +	struct hi655x_regulator_ctrl_regs  *ctrl_regs = &(sreg->ctrl_regs);
>> +	struct hi655x_regulator_ctrl_data  *ctrl_data = &(sreg->ctrl_data);
>> +
>> +	REG_VALUE_SETBITS(value_u32, ctrl_data->shift, ctrl_data->mask, 0x1);
>> +	value_u8  = (unsigned char)value_u32;
>> +	regmap_write(rdev->regmap, ctrl_regs->enable_reg, value_u8);
> 
> I'm not *entirely* sure what this is supposed to be doing but it looks
> like it's duplicating core functionality in a fashion that's really
> quite hard to read.  Why not just use the core functions for setting
> bits?
> 
>> +	udelay(sreg->off_on_delay);
> 
> Use the regualtor core delay functionality please.

OK，i will modify it。
> 
>> +static int hi655x_regulator_pmic_list_voltage_linear(struct regulator_dev *rdev,
>> +				  unsigned int selector)
> 
> This is *definitely* duplicating core functionality, I think you want to
> use regulator_list_voltage_linear_range() or possibly just plain
> _linear() and use separate operations for the LVS regulator.
> 
> We at least need to restructure the code so that the core helper
> functions are used and we don't have regulator type decisions everywhere
> - the whole goal of having per regulator ops is to avoid having to open
> code decisions about which regulator we're dealing with into each op
> function.
> 
OK，i will modify it。
>> +static unsigned int hi655x_regulator_pmic_get_mode(
>> +			struct regulator_dev *rdev)
>> +{
>> +	return REGULATOR_MODE_NORMAL;
>> +}
> 
> Don't implement empty functions, remove all these.
> 
>> +	num_consumer_supplies = of_get_property(np,
>> +				"hisilicon,num_consumer_supplies", NULL);
>> +
>> +	if ((NULL == num_consumer_supplies) || (0 == *num_consumer_supplies)) {
>> +		dev_warn(dev, "%s no consumer_supplies\n", __func__);
>> +		return init_data;
>> +	}
> 
> Obviously the binding is completely undocumented but this is setting off
> alarm bells - why is the driver even considering consumers?  Please make
> sure you are using the core regulator bindings rather than open coding
> something which translates into platform data (which is what this looks
> like).
> 
> I'm not going to review any more of the DT code without binding
> documentation.

I will document the dt-binding first。
> 
>> +	/*
>> +	*initdata mem will release auto;
>> +	*this is kernel 3.10 import.
>> +	*/
> 
> Remove anything related to your vendor kernel support, this is not
> relevant to upstream.
> 
Thanks，Mark，i agree with you and  will modify all of you mentioned soon。