[PATCH 1/8] dt-bindings: pmic: Document Hi655x pmic driver

[wangfei]

On 2015/10/1 15:58, Lee Jones wrote:
> I just noticed that you Cc'ed all of the Core ARM people too.  Please
> do not do that.  I'm sure they have enough of their own mail to trawl
> though.
> 
> Only mail relevant parties i.e. those who show up when you use:
> 
>   ./scripts/get_maintainer.pl.
> 
OK，i see，thank you！
>> Document the new compatible for Hisilicon Hi655x pmic driver.
>>
>> Signed-off-by: Fei Wang <w.f at huawei.com>
>> ---
>>  .../devicetree/bindings/mfd/hisilicon,hi655x.txt   |   80 ++++++++++++++++++++
>>  1 file changed, 80 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> new file mode 100644
>> index 0000000..17bd8ca
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
>> @@ -0,0 +1,80 @@
>> +Hisilicon hi655x Power Management Integrated Circuit (PMIC)
>> +
>> +hi655x consists of a large and varied group of sub-devices:
>> +
>> +Device			 Supply Names	 Description
>> +------			 ------------	 -----------
>> +hi655x-powerkey		:		: Powerkey
>> +hi655x-regulator-pmic	:		: Regulators
>> +hi655x-usbvbus		:		: USB plug detection
>> +hi655x-pmu-rtc		:		: RTC
>> +hi655x-coul		:		: Coulomb
>> +
>> +Required properties:
>> +- compatible : Should be "hisilicon,hi655x-pmic-driver"
>> +- reg: Base address of PMIC on hi6220 soc
>> +- #interrupt-cells: Should be 2, is the local IRQ number for hi655x.
>> +- interrupt-controller: hi655x has internal IRQs (has own IRQ domain).
>> +- pmu_irq_gpio: should be &gpio_pmu_irq_n, is the IRQ gpio of hi655x.
>> +
>> +Example:
>> +	pmic: pmic at F8000000 {
>> +                compatible = "hisilicon,hi655x-pmic-driver";
>> +                reg = <0x0 0xF8000000 0x0 0x1000>;
>> +                #interrupt-cells = <2>;
>> +                interrupt-controller;
>> +                pmu_irq_gpio = <&gpio_pmu_irq_n>;
>> +                status = "ok";
>> +
>> +                ponkey:ponkey at b1{
>> +                        compatible = "hisilicon,hi655x-powerkey";
>> +                        interrupt-parent = <&pmic>;
>> +                        interrupts = <6 0>, <5 0>, <4 0>;
>> +                        interrupt-names = "down", "up", "hold 1s";
>> +                };
>> +
>> +                coul: coul at 1 {
>> +                        compatible = "hisilicon,hi655x-coul";
>> +                        interrupt-parent = <&pmic>;
>> +                        interrupts = <24 0>, <25 0>, <26 0>, <27 0>;
>> +                        interrupt-names = "cl_int_i", "cl_out_i", "cl_in_i", "vbat_int_i";
>> +                        battery_product_index = <0>;
>> +                        status = "ok";
>> +                };
>> +
>> +                rtc: rtc at 1 {
>> +                        compatible = "hisilicon,hi655x-pmu-rtc";
>> +                        interrupt-parent = <&pmic>;
>> +                        interrupts = <20 0>;
>> +                        interrupt-names = "hi655x_pmu_rtc";
>> +                        board_id = <1>;
>> +                };
>> +
>> +                usbvbus:usbvbus at b2{
>> +                        compatible = "hisilicon,hi655x-usbvbus";
>> +                        interrupt-parent = <&pmic>;
>> +                        interrupts = <9 0>, <8 0>;
>> +                        interrupt-names = "connect", "disconnect";
>> +                };
>> +
>> +		ldo2: regulator at a21 {
>> +                        compatible = "hisilicon,hi655x-regulator-pmic";
>> +                        regulator-name = "ldo2";
>> +                        regulator-min-microvolt = <2500000>;
>> +                        regulator-max-microvolt = <3200000>;
>> +                        hisilicon,valid-modes-mask = <0x02>;
>> +                        hisilicon,valid-ops-mask = <0x01d>;
>> +                        hisilicon,initial-mode = <0x02>;
>> +                        hisilicon,regulator-type = <0x01>;
>> +
>> +                        hisilicon,off-on-delay = <120>;
>> +                        hisilicon,ctrl-regs = <0x029 0x02a 0x02b>;
>> +                        hisilicon,ctrl-data = <0x1 0x1>;
>> +                        hisilicon,vset-regs = <0x072>;
>> +                        hisilicon,vset-data = <0 0x3>;
>> +                        hisilicon,regulator-n-vol = <8>;
>> +                        hisilicon,vset-table = <2500000>,<2600000>,<2700000>,<2800000>,<2900000>,<3000000>,<3100000>,<3200000>;
>> +                        hisilicon,num_consumer_supplies = <1>;
>> +                        hisilicon,consumer-supplies = "sensor_analog";
>> +                };
>> +	};
>