[PATCH 2/6] ARM: s3c24xx: rx1950: Use PWM lookup table

[Thierry Reding]

Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.

Cc: Kukjin Kim <kgene at kernel.org>
Cc: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Signed-off-by: Thierry Reding <thierry.reding at gmail.com>
---
 arch/arm/mach-s3c24xx/mach-rx1950.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 1d35ff375a01..774c982a7b7e 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -375,6 +375,11 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
 
 };
 
+static struct pwm_lookup rx1950_pwm_lookup[] = {
+	PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000,
+		   PWM_POLARITY_NORMAL),
+};
+
 static struct pwm_device *lcd_pwm;
 
 static void rx1950_lcd_power(int enable)
@@ -520,10 +525,8 @@ static int rx1950_backlight_notify(struct device *dev, int brightness)
 }
 
 static struct platform_pwm_backlight_data rx1950_backlight_data = {
-	.pwm_id = 0,
 	.max_brightness = 24,
 	.dft_brightness = 4,
-	.pwm_period_ns = 48000,
 	.enable_gpio = -1,
 	.init = rx1950_backlight_init,
 	.notify = rx1950_backlight_notify,
@@ -792,6 +795,7 @@ static void __init rx1950_init_machine(void)
 	gpio_direction_output(S3C2410_GPA(4), 0);
 	gpio_direction_output(S3C2410_GPJ(6), 0);
 
+	pwm_add_table(rx1950_pwm_lookup, ARRAY_SIZE(rx1950_pwm_lookup));
 	platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
 
 	i2c_register_board_info(0, rx1950_i2c_devices,
-- 
2.5.0