[GIT PULL] ARM64: APM X-Gene 1 and X-Gene 2 DTS updates for 4.4

[Duc Dang]

On Thu, Sep 17, 2015 at 4:38 PM, Duc Dang <dhdang at apm.com> wrote:
> Hi Olof,
>
> The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:
>
>   Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
>
> are available in the git repository at:
>
>   https://github.com/AppliedMicro/xgene-next.git tags/xgene-dts-for-v4.4-1
>
> for you to fetch changes up to 1d8d53b62d80dc3a6ae1483891e7d840cd7a51bd:
>
>   arm64: dts: Add poweroff device nodes for APM X-Gene 2 platform
> (2015-09-16 12:04:25 -0700)
>
> ----------------------------------------------------------------
> X-Gene DTS changes queued for v4.4
>
> ----------------------------------------------------------------
> Duc Dang (4):
>       MAINTAINERS: Add Applied Micro (APM) X-Gene Device Tree maintainer
>       arm64: dts: Add X-Gene v2 reboot driver dts node
>       arm64: dts: Add APM X-Gene 2 standby GPIO controller DTS entries
>       arm64: dts: Add poweroff device nodes for APM X-Gene 2 platform
>
> Feng Kan (5):
>       Documentation: arm64: add SCU dts binding documentation to linux kernel
>       arm64: dts: Add X-Gene reboot driver dts node
>       arm64: dts: add APM Merlin Board device tree
>       Documentation: arm: pmu: Add Potenza PMU binding
>       arm64: dts: Add PMU node for APM X-Gene Storm SOC
>
> Tai Nguyen (1):
>       power: reset: Add syscon poweroff device node for APM X-Gene platform
>
>  Documentation/devicetree/bindings/arm/apm/scu.txt |  17 ++
>  Documentation/devicetree/bindings/arm/pmu.txt     |   1 +
>  MAINTAINERS                                       |   5 +
>  arch/arm64/boot/dts/apm/Makefile                  |   1 +
>  arch/arm64/boot/dts/apm/apm-merlin.dts            |  72 ++++++
>  arch/arm64/boot/dts/apm/apm-mustang.dts           |  12 +
>  arch/arm64/boot/dts/apm/apm-shadowcat.dtsi        | 271 ++++++++++++++++++++++
>  arch/arm64/boot/dts/apm/apm-storm.dtsi            |  17 ++
>  8 files changed, 396 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/apm/scu.txt
>  create mode 100644 arch/arm64/boot/dts/apm/apm-merlin.dts
>  create mode 100644 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
Hi Olof,

Please let me know if there is anything I need to change in this pull
request? I rebased these changes over 4.3-rc1.

Regards,
Duc Dang.