[PATCH 02/10] ASoC: samsung/smartq: use dynamic registration

[Krzysztof Kozlowski]

On 26.11.2015 01:06, Arnd Bergmann wrote:
> As a prerequisite for moving s3c64xx into multiplatform configurations,
> we need to change the smartq audio driver to stop using hardcoded
> gpio numbers from the header file, and instead pass the gpio data
> through platform_data.
> 
> In order to do that, we also move the code to use module_platform_driver
> and register the platform device using platform_device_register_simple
> and register the gpios through the gpiod API.
> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> Acked-by: Mark Brown <broonie at kernel.org>
> ---
>  arch/arm/mach-s3c64xx/mach-smartq.c | 13 +++++++
>  sound/soc/samsung/smartq_wm8987.c   | 77 +++++++++++++------------------------
>  2 files changed, 40 insertions(+), 50 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
> index acdfb5fac40f..96784e7f894a 100644
> --- a/arch/arm/mach-s3c64xx/mach-smartq.c
> +++ b/arch/arm/mach-s3c64xx/mach-smartq.c
> @@ -12,6 +12,7 @@
>  #include <linux/delay.h>
>  #include <linux/fb.h>
>  #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
>  #include <linux/init.h>
>  #include <linux/platform_device.h>
>  #include <linux/pwm.h>
> @@ -383,6 +384,15 @@ void __init smartq_map_io(void)
>  	smartq_lcd_mode_set();
>  }
>  
> +static struct gpiod_lookup_table smartq_audio_gpios = {
> +	.dev_id = "smartq-audio",
> +	.table = {
> +		GPIO_LOOKUP("GPL", 12, "headphone detect", 0),
> +		GPIO_LOOKUP("GPK", 12, "amplifiers shutdown", 0),
> +		{ },
> +	},
> +};
> +
>  void __init smartq_machine_init(void)
>  {
>  	s3c_i2c0_set_platdata(NULL);
> @@ -402,4 +412,7 @@ void __init smartq_machine_init(void)
>  
>  	pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
>  	platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
> +
> +	gpiod_add_lookup_table(&smartq_audio_gpios);
> +	platform_device_register_simple("smartq-audio", -1, NULL, 0);
>  }
> diff --git a/sound/soc/samsung/smartq_wm8987.c b/sound/soc/samsung/smartq_wm8987.c
> index a0fe37fbed9f..c6769b16eb19 100644
> --- a/sound/soc/samsung/smartq_wm8987.c
> +++ b/sound/soc/samsung/smartq_wm8987.c
> @@ -13,15 +13,12 @@
>   *
>   */
>  
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/module.h>
>  
>  #include <sound/soc.h>
>  #include <sound/jack.h>
>  
> -#include <mach/gpio-samsung.h>
> -#include <asm/mach-types.h>
> -
>  #include "i2s.h"
>  #include "../codecs/wm8750.h"
>  
> @@ -96,7 +93,7 @@ static struct snd_soc_jack_pin smartq_jack_pins[] = {
>  
>  static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
>  	{
> -		.gpio		= S3C64XX_GPL(12),
> +		.gpio		= -1,
>  		.name		= "headphone detect",
>  		.report		= SND_JACK_HEADPHONE,
>  		.debounce_time	= 200,
> @@ -113,7 +110,9 @@ static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
>  				struct snd_kcontrol *k,
>  				int event)
>  {
> -	gpio_set_value(S3C64XX_GPK(12), SND_SOC_DAPM_EVENT_OFF(event));
> +	struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
> +
> +	gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
>  
>  	return 0;
>  }
> @@ -199,62 +198,40 @@ static struct snd_soc_card snd_soc_smartq = {
>  	.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
>  };
>  
> -static struct platform_device *smartq_snd_device;
> -
> -static int __init smartq_init(void)
> +static int smartq_probe(struct platform_device *pdev)
>  {
> +	struct gpio_desc *gpio;
>  	int ret;
>  
> -	if (!machine_is_smartq7() && !machine_is_smartq5()) {
> -		pr_info("Only SmartQ is supported by this ASoC driver\n");
> -		return -ENODEV;
> -	}
> -
> -	smartq_snd_device = platform_device_alloc("soc-audio", -1);
> -	if (!smartq_snd_device)
> -		return -ENOMEM;
> -
> -	platform_set_drvdata(smartq_snd_device, &snd_soc_smartq);
> -
> -	ret = platform_device_add(smartq_snd_device);
> -	if (ret) {
> -		platform_device_put(smartq_snd_device);
> -		return ret;
> -	}
> +	platform_set_drvdata(pdev, &snd_soc_smartq);
>  
>  	/* Initialise GPIOs used by amplifiers */
> -	ret = gpio_request(S3C64XX_GPK(12), "amplifiers shutdown");
> -	if (ret) {
> -		dev_err(&smartq_snd_device->dev, "Failed to register GPK12\n");
> -		goto err_unregister_device;
> +	gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
> +			      GPIOD_OUT_HIGH);
> +	if (IS_ERR(gpio)) {
> +		dev_err(&pdev->dev, "Failed to register GPK12\n");
> +		ret = PTR_ERR(gpio);
> +		goto out;
>  	}
> +	snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
>  
> -	/* Disable amplifiers */
> -	ret = gpio_direction_output(S3C64XX_GPK(12), 1);
> -	if (ret) {
> -		dev_err(&smartq_snd_device->dev, "Failed to configure GPK12\n");
> -		goto err_free_gpio_amp_shut;
> -	}
> -
> -	return 0;
> -
> -err_free_gpio_amp_shut:
> -	gpio_free(S3C64XX_GPK(12));
> -err_unregister_device:
> -	platform_device_unregister(smartq_snd_device);
> +	ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
> +	if (ret)
> +		dev_err(&pdev->dev, "Failed to register card\n");
>  
> +out:
>  	return ret;
>  }
>  
> -static void __exit smartq_exit(void)
> -{
> -	gpio_free(S3C64XX_GPK(12));
> -
> -	platform_device_unregister(smartq_snd_device);
> -}
> +static struct platform_driver smartq_driver = {
> +	.driver = {
> +		.name = "smartq-audio",
> +		.owner = THIS_MODULE,

The owner should not be needed (coccicheck should also complain). Rest
looks good, so:

Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>

Best regards,
Krzysztof