[PATCH v2] arm, am335x: add support for the bosch shc board

[Tony Lindgren]

* Heiko Schocher <hs at denx.de> [151129 22:51]:
> Hello all,
> 
> Am 18.11.2015 um 09:24 schrieb Heiko Schocher:
> >Hello Dave,
> >
> >Am 17.11.2015 um 22:29 schrieb Dave Gerlach:
> >>Hi,
> >>On 11/17/2015 02:24 AM, Heiko Schocher wrote:
> >>>add support for the am335x based shc board.
> >>>
> >>>UART: 0-2 and 4
> >>>DRAM: 512 MiB
> >>>MMC:  OMAP SD/MMC: 0 @ 26 MHz
> >>>       OMAP SD/MMC: 1 @ 26 MHz
> >>>I2C:  at24 eeprom, pcf8563
> >>>USB:  USB1 (host)
> >>>
> >>>Signed-off-by: Heiko Schocher <hs at denx.de>
> >>>---
> >>>The following patches are needed to get all working
> >>>for the shc board:
> >>>- disable clkout on pcf8563
> >>>   accepted.
> >>>   http://www.spinics.net/lists/devicetree/msg98542.html
> >>>
> >>>- leds: leds-gpio: add shutdown function
> >>>   accepted.
> >>>   https://lkml.org/lkml/2015/10/13/169
> >>>
> >>>- net: phy: smsc: disable energy detect mode
> >>>   accepted
> >>>   [PATCH v2 2/2] net: phy: smsc: disable energy detect mode
> >>>   https://lkml.org/lkml/2015/10/17/2
> >>>   [PATCH v2 1/2] drivers: net: cpsw: add phy-handle parsing
> >>>   https://lkml.org/lkml/2015/10/17/4
> >>>
> >>>- ARM: OMAP2+: omap_hwmod: Introduce ti,no-init dt property
> >>>   http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/328204.html
> >>>   @Dave: What is the current state of this patch?
> >>>   I have the same problem here on this am335x based board
> >>>
> >>
> >>A different approach is being taken for resolving the issue of rtc hwmod on am43x epos evm [1],
> >>which is what I was attempting to solve with the patch you have linked. We decided to avoid changing
> >>omap_hwmod code and I haven't been pursuing the ti,no-init flag anymore.
> >
> >Maybe I overlook something, but I cannot see, how [1] solves the RTC
> >hwmod problem on am335x SoC based boards. Not all boards have this problem,
> >so the RTC hwmod cannot be disabled for all am335x boards ...
> >
> >It must be somehow configurable for boards ... I have am335x boards
> >which use the rtc from the SoC
> 
> gentle ping ...
> 
> No more comments on this patch? Is it Ok for mainline or are
> there more issues?

Looks OK to me, hoping to start applying the dts changes for v4.5 this
week.

Tony

> >>[1] http://www.spinics.net/lists/linux-omap/msg121987.html