[PATCH 2/4] ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node

Sebastian Hesselbarth sebastian.hesselbarth at gmail.com
Sat Nov 28 03:14:06 PST 2015


NAND flash partitions should be part of a partitions sub-node
not the flash node itself. Move the partitions which will also
allow different bootloaders get rid of the stock partitions
easily by removing the partitions node.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Jason Cooper <jason at lakedaemon.net> 
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com> 
Cc: Rob Herring <robh+dt at kernel.org> 
Cc: Pawel Moll <pawel.moll at arm.com> 
Cc: Mark Rutland <mark.rutland at arm.com> 
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk> 
Cc: Kumar Gala <galak at codeaurora.org> 
Cc: Russell King <linux at arm.linux.org.uk> 
Cc: Benoit Masson <yahoo at perenite.com>
Cc: linux-arm-kernel at lists.infradead.org 
Cc: devicetree at vger.kernel.org 
Cc: linux-kernel at vger.kernel.org 
---
 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 67 +++++++++++++------------
 1 file changed, 36 insertions(+), 31 deletions(-)

diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 30a0a6eac645..76781fd18624 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -151,37 +151,42 @@
 				marvell,nand-enable-arbiter;
 				nand-on-flash-bbt;
 
-				partition at 0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
-
-				partition at e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition at 100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition at 120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition at 520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition at xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
+				partitions {
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition at 0 {
+						label = "u-boot";
+						reg = <0x0000000 0xe0000>;
+						read-only;
+					};
+
+					partition at e0000 {
+						label = "u-boot-env";
+						reg = <0xe0000 0x20000>;
+						read-only;
+					};
+
+					partition at 100000 {
+						label = "u-boot-env2";
+						reg = <0x100000 0x20000>;
+						read-only;
+					};
+
+					partition at 120000 {
+						label = "zImage";
+						reg = <0x120000 0x400000>;
+					};
+
+					partition at 520000 {
+						label = "initrd";
+						reg = <0x520000 0x400000>;
+					};
+
+					partition at xE00000 {
+						label = "boot";
+						reg = <0xE00000 0x3F200000>;
+					};
 				};
 			};
 		};
-- 
2.1.4




More information about the linux-arm-kernel mailing list