[PATCH v2 02/10] drm/hisilicon: Add DT binding docs for hi6220 display subsystem
Xinliang Liu
xinliang.liu at linaro.org
Sat Nov 28 02:38:57 PST 2015
Add the device tree binding documentation for hi6220 SoC display subsystem.
drm master device binding doc.
ADE display controller binding doc.
DSI controller binding doc.
Signed-off-by: Xinliang Liu <xinliang.liu at linaro.org>
Signed-off-by: Xinwei Kong <kong.kongxinwei at hisilicon.com>
Signed-off-by: Andy Green <andy.green at linaro.org>
---
.../bindings/display/hisilicon/hisi-ade.txt | 42 ++++++++++++++
.../bindings/display/hisilicon/hisi-drm.txt | 66 ++++++++++++++++++++++
.../bindings/display/hisilicon/hisi-dsi.txt | 53 +++++++++++++++++
3 files changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
new file mode 100644
index 0000000..2777a2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
@@ -0,0 +1,42 @@
+Device-Tree bindings for hisilicon ADE display controller driver
+
+ADE (Advanced Display Engine) is the display controller which grab image
+data from memory, do composition, do post image processing, generate RGB
+timing stream and transfer to DSI.
+
+Required properties:
+- compatible: value should be one of the following
+ "hisilicon,hi6220-ade".
+- reg: physical base address and length of the controller's registers.
+- reg-names: name of physical base.
+- interrupt: the interrupt number.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- ade_core_clk_rate: ADE core clock rate.
+- media_noc_clk_rate: media noc module clock rate.
+
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ ade: ade at f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>,
+ <0x0 0xf4410000 0x0 0x1000>;
+ reg-names = "ade_base",
+ "media_base";
+ interrupts = <0 115 4>;
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>,
+ <&media_ctrl HI6220_PLL_SYS>,
+ <&media_ctrl HI6220_PLL_SYS_MEDIA>;
+ clock-names = "clk_ade_core",
+ "aclk_codec_jpeg_src",
+ "clk_ade_pix",
+ "clk_syspll_src",
+ "clk_medpll_src";
+ ade_core_clk_rate = <360000000>;
+ media_noc_clk_rate = <288000000>;
+ };
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
new file mode 100644
index 0000000..fd93026
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-drm.txt
@@ -0,0 +1,66 @@
+Hisilicon DRM master device
+
+The Hisilicon DRM master device is a virtual device needed to list all
+the other display relevant nodes that comprise the display subsystem.
+
+
+Required properties:
+- compatible: Should be "hisilicon,<chip>-dss"
+- #address-cells: should be set to 2.
+- #size-cells: should be set to 2.
+- range: to allow probing of subdevices.
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent.
+
+Required sub nodes:
+All the device nodes of display subsystem of SoC should be the sub nodes.
+Such as display controller node, DSI node and so on.
+
+A example of HiKey board hi6220 SoC specific DT entry:
+Example:
+
+ display-subsystem {
+ compatible = "hisilicon,hi6220-dss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ dma-coherent;
+
+ ade: ade at f4100000 {
+ compatible = "hisilicon,hi6220-ade";
+ reg = <0x0 0xf4100000 0x0 0x7800>,
+ <0x0 0xf4410000 0x0 0x1000>;
+ reg-names = "ade_base",
+ "media_base";
+ interrupts = <0 115 4>; /* ldi interrupt */
+
+ clocks = <&media_ctrl HI6220_ADE_CORE>,
+ <&media_ctrl HI6220_CODEC_JPEG>,
+ <&media_ctrl HI6220_ADE_PIX_SRC>,
+ <&media_ctrl HI6220_PLL_SYS>,
+ <&media_ctrl HI6220_PLL_SYS_MEDIA>;
+ /*clock name*/
+ clock-names = "clk_ade_core",
+ "aclk_codec_jpeg_src",
+ "clk_ade_pix",
+ "clk_syspll_src",
+ "clk_medpll_src";
+ ade_core_clk_rate = <360000000>;
+ media_noc_clk_rate = <288000000>;
+ };
+
+ dsi: dsi at 0xf4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk_dsi";
+
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&adv_in>;
+ };
+ };
+
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt
new file mode 100644
index 0000000..30abaa85
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-dsi.txt
@@ -0,0 +1,53 @@
+Device-Tree bindings for hisilicon DSI controller driver
+
+A DSI controller resides in the middle of display controller and external
+HDMI converter.
+
+Required properties:
+- compatible: value should be one of the following
+ "hisilicon,hi6220-dsi".
+- reg: physical base address and length of the controller's registers.
+- clocks: the clocks needed.
+- clock-names: the name of the clocks.
+- port: DSI controller output port. This contains one endpoint subnode, with its
+ remote-endpoint set to the phandle of the connected external HDMI endpoint.
+ See Documentation/devicetree/bindings/graph.txt for device graph info.
+
+A example of HiKey board hi6220 SoC and board specific DT entry:
+Example:
+
+SoC specific:
+ dsi: dsi at 0xf4107800 {
+ compatible = "hisilicon,hi6220-dsi";
+ reg = <0x0 0xf4107800 0x0 0x100>;
+ clocks = <&media_ctrl HI6220_DSI_PCLK>;
+ clock-names = "pclk_dsi";
+
+ port {
+ dsi_out: endpoint {
+ remote-endpoint = <&adv_in>;
+ };
+ };
+
+ };
+
+Board specific:
+ i2c2: i2c at f7102000 {
+ status = "ok";
+
+ adv7533: adv7533 at 39 {
+ compatible = "adi,adv7533";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 2>;
+ pd-gpio = <&gpio0 4 0>;
+ adi,dsi-lanes = <4>;
+
+ port {
+ adv_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+ };
+
--
1.9.1
More information about the linux-arm-kernel
mailing list