[PATCH] ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
Heiko Stübner
heiko at sntech.de
Fri Nov 27 14:53:35 PST 2015
Add support for the IR receiver present on the R89 board.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/boot/dts/rk3288-r89.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-r89.dts b/arch/arm/boot/dts/rk3288-r89.dts
index 14b9fc7..17f13c7 100644
--- a/arch/arm/boot/dts/rk3288-r89.dts
+++ b/arch/arm/boot/dts/rk3288-r89.dts
@@ -78,6 +78,13 @@
};
};
+ ir: ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_int>;
+ };
+
vcc_host: vcc-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -310,6 +317,12 @@
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pmic {
pmic_int: pmic-int {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
--
2.6.1
More information about the linux-arm-kernel
mailing list