[PATCH 14/18] arm64: renesas: salvator-x: Sound SSI PIO support
Simon Horman
horms+renesas at verge.net.au
Thu Nov 26 17:55:31 PST 2015
From: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
This patch adds PIO sound support for Salvator-X board.
It can use 44.1kHz base sound only at this point, since 48kHz base
sound needs CS2000, but it is not yet upstreamed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 76 ++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index d829fdae3c56..90ca7faa629c 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -31,6 +31,28 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ x12_clk: x12_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
+
+ rsnd_ak4613: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcpu>;
+ simple-audio-card,frame-master = <&sndcpu>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4613>;
+ };
+ };
};
&extal_clk {
@@ -56,6 +78,17 @@
renesas,groups = "avb_mdc";
renesas,function = "avb";
};
+
+ sound_pins: sound {
+ renesas,groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+ renesas,function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ renesas,groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
+ "audio_clkout_a", "audio_clkout3_a";
+ renesas,function = "audio_clk";
+ };
};
&scif1 {
@@ -77,6 +110,49 @@
pinctrl-names = "default";
status = "okay";
+
+ clock-frequency = <100000>;
+
+ ak4613: codec at 10 {
+ compatible = "asahi-kasei,ak4613";
+ #sound-dai-cells = <0>;
+ reg = <0x10>;
+ clocks = <&rcar_sound 3>;
+ };
+};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ /* audio_clkout0/1/2/3 */
+ #clock-cells = <1>;
+ clock-frequency = <11289600>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0>;
+ capture = <&ssi1>;
+ };
+ };
+};
+
+&ssi0 {
+ pio-transfer;
+};
+
+&ssi1 {
+ pio-transfer;
+ shared-pin;
+};
+
+&audio_clk_a {
+ clock-frequency = <22579200>;
};
&avb {
--
2.1.4
More information about the linux-arm-kernel
mailing list