[PATCH 01/18] ARM: am57xx: cl-som-am57x: dts: add basic module support
Rob Herring
robh at kernel.org
Wed Nov 25 12:05:50 PST 2015
On Wed, Nov 25, 2015 at 08:39:33AM +0200, Dmitry Lifshitz wrote:
> Add support for CompuLab CM-SOM-AM57X board.
>
> CL-SOM-AM57x is a miniature System-on-Module (SoM) based on
> TI Sitara AM57x ARM Cortex-A15 System-on-Chip family.
>
> https://www.compulab.co.il/products/computer-on-modules/cl-som-am57x-ti-am5728-am5718-system-on-module/
>
> Add basic DT support for standalone module (without a carrier board):
>
> * Memory configuration
> * Heartbeat led
> * I2C1 bus
> * PMIC
> * SATA
>
> Signed-off-by: Dmitry Lifshitz <lifshitz at compulab.co.il>
> Acked-by: Igor Grinberg <grinberg at compulab.co.il>
Acked-by: Rob Herring <robh at kernel.org>
> ---
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 259 +++++++++++++++++++++
> 3 files changed, 264 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/am57xx-cl-som-am57x.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index da84372..dd53c90 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -156,6 +156,9 @@ Boards:
> - AM437x SK EVM: AM437x StarterKit Evaluation Module
> compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
>
> +- AM57XX CL-SOM-AM57x
> + compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
> +
> - DRA742 EVM: Software Development Board for DRA742
> compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5492a24..803a020 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -477,8 +477,9 @@ dtb-$(CONFIG_SOC_OMAP5) += \
> omap5-sbc-t54.dtb \
> omap5-uevm.dtb
> dtb-$(CONFIG_SOC_DRA7XX) += \
> - dra7-evm.dtb \
> am57xx-beagle-x15.dtb \
> + am57xx-cl-som-am57x.dtb \
> + dra7-evm.dtb \
> dra72-evm.dtb
> dtb-$(CONFIG_ARCH_ORION5X) += \
> orion5x-lacie-d2-network.dtb \
> diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
> new file mode 100644
> index 0000000..b11d7da
> --- /dev/null
> +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
> @@ -0,0 +1,259 @@
> +/*
> + * Support for CompuLab CL-SOM-AM57x System-on-Module
> + *
> + * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
> + * Author: Dmitry Lifshitz <lifshitz at compulab.co.il>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include "dra74x.dtsi"
> +
> +/ {
> + model = "CompuLab CL-SOM-AM57x";
> + compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x20000000>; /* 512 MB - minimal configuration */
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&leds_pins_default>;
> +
> + led at 0 {
> + label = "cl-som-am57x:green";
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> + };
> +};
> +
> +&dra7_pmx_core {
> + leds_pins_default: leds_pins_default {
> + pinctrl-single,pins = <
> + DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */
> + >;
> + };
> +
> + i2c1_pins_default: i2c1_pins_default {
> + pinctrl-single,pins = <
> + DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
> + DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
> + >;
> + };
> +
> + tps659038_pins_default: tps659038_pins_default {
> + pinctrl-single,pins = <
> + DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
> + >;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins_default>;
> + clock-frequency = <400000>;
> +
> + tps659038: tps659038 at 58 {
> + compatible = "ti,tps659038";
> + reg = <0x58>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&tps659038_pins_default>;
> +
> + #interrupt-cells = <2>;
> + interrupt-controller;
> +
> + ti,system-power-controller;
> +
> + tps659038_pmic {
> + compatible = "ti,tps659038-pmic";
> +
> + regulators {
> + smps12_reg: smps12 {
> + /* VDD_MPU */
> + regulator-name = "smps12";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps3_reg: smps3 {
> + /* VDD_DDR */
> + regulator-name = "smps3";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps45_reg: smps45 {
> + /* VDD_DSPEVE */
> + regulator-name = "smps45";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1160000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps6_reg: smps6 {
> + /* VDD_GPU */
> + regulator-name = "smps6";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1160000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps7_reg: smps7 {
> + /* VDD_CORE */
> + regulator-name = "smps7";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1160000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps8_reg: smps8 {
> + /* VDD_IVA */
> + regulator-name = "smps8";
> + regulator-min-microvolt = < 850000>;
> + regulator-max-microvolt = <1160000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + smps9_reg: smps9 {
> + /* PMIC_3V3 */
> + regulator-name = "smps9";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> +
> + ldo1_reg: ldo1 {
> + /* VDD_SD / VDDSHV8 */
> + regulator-name = "ldo1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + ldo2_reg: ldo2 {
> + /* VDD_1V8 */
> + regulator-name = "ldo2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo3_reg: ldo3 {
> + /* VDDA_1V8_PHYA */
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo4_reg: ldo4 {
> + /* VDDA_1V8_PHYB */
> + regulator-name = "ldo4";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldo9_reg: ldo9 {
> + /* VDD_RTC */
> + regulator-name = "ldo9";
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldoln_reg: ldoln {
> + /* VDDA_1V8_PLL */
> + regulator-name = "ldoln";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + ldousb_reg: ldousb {
> + /* VDDA_3V_USB: VDDA_USBHS33 */
> + regulator-name = "ldousb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + /* regen1 not used */
> + };
> + };
> +
> + tps659038_pwr_button: tps659038_pwr_button {
> + compatible = "ti,palmas-pwrbutton";
> + interrupt-parent = <&tps659038>;
> + interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
> + wakeup-source;
> + ti,palmas-long-press-seconds = <12>;
> + };
> +
> + tps659038_gpio: tps659038_gpio {
> + compatible = "ti,palmas-gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +};
> +
> +&cpu0 {
> + cpu0-supply = <&smps12_reg>;
> + voltage-tolerance = <1>;
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&mailbox5 {
> + status = "okay";
> + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
> + status = "okay";
> + };
> + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
> + status = "okay";
> + };
> +};
> +
> +&mailbox6 {
> + status = "okay";
> + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
> + status = "okay";
> + };
> + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
> + status = "okay";
> + };
> +};
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list