[PATCH 04/10] ARM: s3c64xx: prepare initcalls for multiplatform
Arnd Bergmann
arnd at arndb.de
Wed Nov 25 08:06:49 PST 2015
In a multiplatform kernel, each initcall is run regardless
of the platform it is meant for, so it must not attempt to
access SoC-specific registers.
This adds 'if (soc_is_s3c64xx)' to all initcalls that are
specific to the s3c64xx platform, to prevent them from breaking
other platforms once we can build them into a combined kernel.
Signed-off-by: Arnd Bergmann <arnd at arndb.de>
---
arch/arm/mach-s3c64xx/common.c | 4 ++--
arch/arm/mach-s3c64xx/cpuidle.c | 5 ++++-
arch/arm/mach-s3c64xx/irq-pm.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410-module.c | 4 ++++
arch/arm/mach-s3c64xx/pl080.c | 4 ++++
arch/arm/mach-s3c64xx/pm.c | 4 ++++
arch/arm/mach-s3c64xx/s3c6400.c | 2 +-
arch/arm/mach-s3c64xx/s3c6410.c | 2 +-
arch/arm/plat-samsung/gpio-samsung.c | 11 +++++------
arch/arm/plat-samsung/init.c | 5 +++++
10 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index ddb30b8434c5..3dea4a4ef165 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -208,7 +208,7 @@ void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
static __init int s3c64xx_dev_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
subsys_system_register(&s3c64xx_subsys, NULL);
@@ -413,7 +413,7 @@ static int __init s3c64xx_init_irq_eint(void)
int irq;
/* On DT-enabled systems EINTs are handled by pinctrl-s3c64xx driver. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return -ENODEV;
for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) {
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index 93aa8cb70195..5322db51150e 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -18,6 +18,7 @@
#include <asm/cpuidle.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include "regs-sys.h"
@@ -57,6 +58,8 @@ static struct cpuidle_driver s3c64xx_cpuidle_driver = {
static int __init s3c64xx_init_cpuidle(void)
{
- return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ if (soc_is_s3c64xx())
+ return cpuidle_register(&s3c64xx_cpuidle_driver, NULL);
+ return 0;
}
device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index ae4ea7601f60..0bbf1faaee42 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -113,7 +113,7 @@ static struct syscore_ops s3c64xx_irq_syscore_ops = {
static __init int s3c64xx_syscore_init(void)
{
/* Appropriate drivers (pinctrl, uart) handle this when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
register_syscore_ops(&s3c64xx_irq_syscore_ops);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 9c00d83f7151..be21f06e6b3f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,6 +29,7 @@
#include <linux/platform_data/spi-s3c64xx.h>
+#include <plat/cpu.h>
#include "crag6410.h"
static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
@@ -399,6 +400,9 @@ static struct i2c_driver wlf_gf_module_driver = {
static int __init wlf_gf_module_register(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
return i2c_add_driver(&wlf_gf_module_driver);
}
device_initcall(wlf_gf_module_register);
diff --git a/arch/arm/mach-s3c64xx/pl080.c b/arch/arm/mach-s3c64xx/pl080.c
index 901a984bddc2..89c5a62830a7 100644
--- a/arch/arm/mach-s3c64xx/pl080.c
+++ b/arch/arm/mach-s3c64xx/pl080.c
@@ -14,6 +14,7 @@
#include <linux/amba/pl08x.h>
#include <linux/of.h>
+#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
@@ -230,6 +231,9 @@ static AMBA_AHB_DEVICE(s3c64xx_dma1, "dma-pl080s.1", 0,
static int __init s3c64xx_pl080_init(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C64XX_SDMA_SEL);
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 75b14e756383..59d91b83b03d 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -22,6 +22,7 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
@@ -332,6 +333,9 @@ int __init s3c64xx_pm_init(void)
static __init int s3c64xx_pm_initcall(void)
{
+ if (!soc_is_s3c64xx())
+ return 0;
+
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 33273abef669..5ea82accc773 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -81,7 +81,7 @@ static struct device s3c6400_dev = {
static int __init s3c6400_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6400_subsys, NULL);
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index eadc48dee0e4..92bb927c4478 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -84,7 +84,7 @@ static struct device s3c6410_dev = {
static int __init s3c6410_core_init(void)
{
/* Not applicable when using DT. */
- if (of_have_populated_dt())
+ if (of_have_populated_dt() || !soc_is_s3c64xx())
return 0;
return subsys_system_register(&s3c6410_subsys, NULL);
diff --git a/arch/arm/plat-samsung/gpio-samsung.c b/arch/arm/plat-samsung/gpio-samsung.c
index 7c288ba4dc87..37faa8eab78f 100644
--- a/arch/arm/plat-samsung/gpio-samsung.c
+++ b/arch/arm/plat-samsung/gpio-samsung.c
@@ -1176,14 +1176,16 @@ static __init int samsung_gpiolib_init(void)
* interfaces. For legacy (non-DT) platforms this driver is used.
*/
if (of_have_populated_dt())
- return -ENODEV;
-
- samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs));
+ return 0;
if (soc_is_s3c24xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
s3c24xx_gpiolib_add_chips(s3c24xx_gpios,
ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO);
} else if (soc_is_s3c64xx()) {
+ samsung_gpiolib_set_cfg(samsung_gpio_cfgs,
+ ARRAY_SIZE(samsung_gpio_cfgs));
samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit,
ARRAY_SIZE(s3c64xx_gpios_2bit),
S3C64XX_VA_GPIO + 0xE0, 0x20);
@@ -1192,9 +1194,6 @@ static __init int samsung_gpiolib_init(void)
S3C64XX_VA_GPIO);
samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2,
ARRAY_SIZE(s3c64xx_gpios_4bit2));
- } else {
- WARN(1, "Unknown SoC in gpio-samsung, no GPIOs added\n");
- return -ENODEV;
}
return 0;
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 11fbbc26e49f..3776f7e752f0 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -152,6 +152,11 @@ static int __init s3c_arch_init(void)
{
int ret;
+ /* init is only needed for ATAGS based platforms */
+ if (!IS_ENABLED(CONFIG_ATAGS) ||
+ (!soc_is_s3c24xx() && !soc_is_s3c64xx()))
+ return 0;
+
// do the correct init for cpu
if (cpu == NULL) {
--
2.1.0.rc2
More information about the linux-arm-kernel
mailing list