[PATCH v3 2/2] clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical path

Jisheng Zhang jszhang at marvell.com
Wed Nov 25 07:48:34 PST 2015


It's safe to use the relaxed version. From another side, the relaxed io
accessor macros are available on all architectures now, so we can use
the relaxed versions to get a trivial system performance improvement,
we measured time the following functions spent on Marvell BG4CT:

__apbt_read_clocksource():

before the patch: 1263240ns on average
after the patch: 1250080ns on average
improved by 1%

apbt_eoi():

before the patch: 1290960ns on average
after the patch: 1248240ns on average

apbt_next_event():

before the patch: 3333660ns on average
after the patch: 1322040ns on average

improved by 60%!

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 drivers/clocksource/dw_apb_timer.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)

diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index 114696b..6334526 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -60,6 +60,17 @@ static inline void apbt_writel(struct dw_apb_timer *timer, u32 val,
 	writel(val, timer->base + offs);
 }
 
+static inline u32 apbt_readl_relaxed(struct dw_apb_timer *timer, unsigned long offs)
+{
+	return readl_relaxed(timer->base + offs);
+}
+
+static inline void apbt_writel_relaxed(struct dw_apb_timer *timer, u32 val,
+			unsigned long offs)
+{
+	writel_relaxed(val, timer->base + offs);
+}
+
 static void apbt_disable_int(struct dw_apb_timer *timer)
 {
 	u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
@@ -81,7 +92,7 @@ void dw_apb_clockevent_pause(struct dw_apb_clock_event_device *dw_ced)
 
 static void apbt_eoi(struct dw_apb_timer *timer)
 {
-	apbt_readl(timer, APBTMR_N_EOI);
+	apbt_readl_relaxed(timer, APBTMR_N_EOI);
 }
 
 static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
@@ -200,13 +211,13 @@ static int apbt_next_event(unsigned long delta,
 	struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
 
 	/* Disable timer */
-	ctrl = apbt_readl(&dw_ced->timer, APBTMR_N_CONTROL);
+	ctrl = apbt_readl_relaxed(&dw_ced->timer, APBTMR_N_CONTROL);
 	ctrl &= ~APBTMR_CONTROL_ENABLE;
-	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 	/* write new count */
-	apbt_writel(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
+	apbt_writel_relaxed(&dw_ced->timer, delta, APBTMR_N_LOAD_COUNT);
 	ctrl |= APBTMR_CONTROL_ENABLE;
-	apbt_writel(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
+	apbt_writel_relaxed(&dw_ced->timer, ctrl, APBTMR_N_CONTROL);
 
 	return 0;
 }
@@ -342,7 +353,8 @@ static cycle_t __apbt_read_clocksource(struct clocksource *cs)
 	struct dw_apb_clocksource *dw_cs =
 		clocksource_to_dw_apb_clocksource(cs);
 
-	current_count = apbt_readl(&dw_cs->timer, APBTMR_N_CURRENT_VALUE);
+	current_count = apbt_readl_relaxed(&dw_cs->timer,
+					APBTMR_N_CURRENT_VALUE);
 
 	return (cycle_t)~current_count;
 }
-- 
2.6.2




More information about the linux-arm-kernel mailing list