[PATCH] clocksource/drivers/dw_apb_timer: Fix apbt_readl return types
Jisheng Zhang
jszhang at marvell.com
Wed Nov 25 07:41:23 PST 2015
On Marvell BG4CT platform, we observed the __apbt_read_clocksource()
return wrong value: Let's assume the APBTMR_N_CURRENT_VALUE value is
0xf0000000, we got 0xffffffff0fffffff, but it should be 0xfffffff.
This issue should be common on all 64bit platforms. We fix the issue
by letting aptb_readl() return u32. apbt_writel() is also updated
to write u32 val rather than unsigned long.
Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
drivers/clocksource/dw_apb_timer.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/clocksource/dw_apb_timer.c b/drivers/clocksource/dw_apb_timer.c
index c76c750..3a6d9db 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -49,12 +49,12 @@ clocksource_to_dw_apb_clocksource(struct clocksource *cs)
return container_of(cs, struct dw_apb_clocksource, cs);
}
-static unsigned long apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
+static u32 apbt_readl(struct dw_apb_timer *timer, unsigned long offs)
{
return readl(timer->base + offs);
}
-static void apbt_writel(struct dw_apb_timer *timer, unsigned long val,
+static void apbt_writel(struct dw_apb_timer *timer, u32 val,
unsigned long offs)
{
writel(val, timer->base + offs);
@@ -62,7 +62,7 @@ static void apbt_writel(struct dw_apb_timer *timer, unsigned long val,
static void apbt_disable_int(struct dw_apb_timer *timer)
{
- unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+ u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
ctrl |= APBTMR_CONTROL_INT;
apbt_writel(timer, ctrl, APBTMR_N_CONTROL);
@@ -103,7 +103,7 @@ static irqreturn_t dw_apb_clockevent_irq(int irq, void *data)
static void apbt_enable_int(struct dw_apb_timer *timer)
{
- unsigned long ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
+ u32 ctrl = apbt_readl(timer, APBTMR_N_CONTROL);
/* clear pending intr */
apbt_readl(timer, APBTMR_N_EOI);
ctrl &= ~APBTMR_CONTROL_INT;
@@ -113,7 +113,7 @@ static void apbt_enable_int(struct dw_apb_timer *timer)
static int apbt_shutdown(struct clock_event_device *evt)
{
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
- unsigned long ctrl;
+ u32 ctrl;
pr_debug("%s CPU %d state=shutdown\n", __func__,
cpumask_first(evt->cpumask));
@@ -127,7 +127,7 @@ static int apbt_shutdown(struct clock_event_device *evt)
static int apbt_set_oneshot(struct clock_event_device *evt)
{
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
- unsigned long ctrl;
+ u32 ctrl;
pr_debug("%s CPU %d state=oneshot\n", __func__,
cpumask_first(evt->cpumask));
@@ -160,7 +160,7 @@ static int apbt_set_periodic(struct clock_event_device *evt)
{
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
unsigned long period = DIV_ROUND_UP(dw_ced->timer.freq, HZ);
- unsigned long ctrl;
+ u32 ctrl;
pr_debug("%s CPU %d state=periodic\n", __func__,
cpumask_first(evt->cpumask));
@@ -196,7 +196,7 @@ static int apbt_resume(struct clock_event_device *evt)
static int apbt_next_event(unsigned long delta,
struct clock_event_device *evt)
{
- unsigned long ctrl;
+ u32 ctrl;
struct dw_apb_clock_event_device *dw_ced = ced_to_dw_apb_ced(evt);
/* Disable timer */
@@ -323,7 +323,7 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
* start count down from 0xffff_ffff. this is done by toggling the
* enable bit then load initial load count to ~0.
*/
- unsigned long ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
+ u32 ctrl = apbt_readl(&dw_cs->timer, APBTMR_N_CONTROL);
ctrl &= ~APBTMR_CONTROL_ENABLE;
apbt_writel(&dw_cs->timer, ctrl, APBTMR_N_CONTROL);
@@ -338,7 +338,7 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs)
static cycle_t __apbt_read_clocksource(struct clocksource *cs)
{
- unsigned long current_count;
+ u32 current_count;
struct dw_apb_clocksource *dw_cs =
clocksource_to_dw_apb_clocksource(cs);
--
2.6.2
More information about the linux-arm-kernel
mailing list