[PATCH Resend] clk: imx: add 'is_prepared' clk_ops callback for pllv3 clk
Bai Ping
b51503 at freescale.com
Tue Nov 24 08:06:53 PST 2015
Add 'is_prepared' callback function for pllv3 type clk to make sure when
the system is bootup, the unused clk is in a known state to match the
prepare count info.
Signed-off-by: Bai Ping <b51503 at freescale.com>
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
---
-resend, add clk maintainers.
drivers/clk/imx/clk-pllv3.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c
index 6addf8f..c05c43d 100644
--- a/drivers/clk/imx/clk-pllv3.c
+++ b/drivers/clk/imx/clk-pllv3.c
@@ -97,6 +97,16 @@ static void clk_pllv3_unprepare(struct clk_hw *hw)
writel_relaxed(val, pll->base);
}
+static int clk_pllv3_is_prepared(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+
+ if (readl_relaxed(pll->base) & BM_PLL_LOCK)
+ return 1;
+
+ return 0;
+}
+
static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
@@ -139,6 +149,7 @@ static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops clk_pllv3_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_recalc_rate,
.round_rate = clk_pllv3_round_rate,
.set_rate = clk_pllv3_set_rate,
@@ -193,6 +204,7 @@ static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops clk_pllv3_sys_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_sys_recalc_rate,
.round_rate = clk_pllv3_sys_round_rate,
.set_rate = clk_pllv3_sys_set_rate,
@@ -265,6 +277,7 @@ static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
static const struct clk_ops clk_pllv3_av_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_av_recalc_rate,
.round_rate = clk_pllv3_av_round_rate,
.set_rate = clk_pllv3_av_set_rate,
@@ -279,6 +292,7 @@ static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
static const struct clk_ops clk_pllv3_enet_ops = {
.prepare = clk_pllv3_prepare,
.unprepare = clk_pllv3_unprepare,
+ .is_prepared = clk_pllv3_is_prepared,
.recalc_rate = clk_pllv3_enet_recalc_rate,
};
--
1.9.1
More information about the linux-arm-kernel
mailing list