[PATCH v2 0/5] pinctrl: meson: enable support for external GPIO interrupts

Carlo Caione carlo at caione.org
Mon Nov 23 02:16:51 PST 2015


From: Carlo Caione <carlo at endlessm.com>

In Meson SoCs we have 8 independent GPIO interrupts that can be programmed to
use any of the GPIOs in the chip as interrupt source.

These GPIOs are managed by GIC but they can be conditioned (and enabled) by
some registers external to the GIC.

GPIOs |--[mux1 or mux2]--[polarity]--[filter]--[edge_select]--> GIC

For discussion see comment to the [PATCH 3/5].

Changelog:

* V2:
    - Introduced .irq_request_resources() and .irq_release_resources()
    - s/virq/irq/ and s/pin/hwirq/
    - Moved to the new irq_fwspec

Carlo Caione (5):
  of/irq: export of_irq_find_parent again
  irqdomain: introduce irq_of_phandle_args_to_fwspec
  pinctrl: meson: enable GPIO IRQs
  pinctrl: dt-binding: Extend meson documentation with GPIO IRQs support
  ARM: meson: DTS: Enable GPIO IRQs

 .../devicetree/bindings/pinctrl/meson,pinctrl.txt  |  12 +
 arch/arm/boot/dts/meson8b.dtsi                     |   6 +
 drivers/of/irq.c                                   |   2 +-
 drivers/pinctrl/Kconfig                            |   1 +
 drivers/pinctrl/meson/pinctrl-meson.c              | 303 +++++++++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson.h              |  18 +-
 drivers/pinctrl/meson/pinctrl-meson8.c             |  36 ++-
 drivers/pinctrl/meson/pinctrl-meson8b.c            |  36 ++-
 include/linux/of_irq.h                             |   8 +
 kernel/irq/irqdomain.c                             |   5 +-
 10 files changed, 393 insertions(+), 34 deletions(-)

-- 
2.5.0




More information about the linux-arm-kernel mailing list