[PATCH] ASoC: pxa: remove incorrect do_div() call

Arnd Bergmann arnd at arndb.de
Mon Nov 23 00:54:22 PST 2015


On Monday 23 November 2015 16:10:49 zhangfei wrote:
> On 11/20/2015 05:32 PM, Arnd Bergmann wrote:
> > diff --git a/sound/soc/pxa/brownstone.c b/sound/soc/pxa/brownstone.c
> > index 6147e86e9b0f..416ea646c3b1 100644
> > --- a/sound/soc/pxa/brownstone.c
> > +++ b/sound/soc/pxa/brownstone.c
> > @@ -63,8 +63,7 @@ static int brownstone_wm8994_hw_params(struct snd_pcm_substream *substream,
> >               sysclk    = params_rate(params) * 512;
> >               sspa_mclk = params_rate(params) * 64;
> >       }
> > -     sspa_div = freq_out;
> > -     do_div(sspa_div, sspa_mclk);
> > +     sspa_div = freq_out / sspa_mclk;
> >
> >       snd_soc_dai_set_sysclk(cpu_dai, MMP_SSPA_CLK_AUDIO, freq_out, 0);
> >       snd_soc_dai_set_pll(cpu_dai, MMP_SYSCLK, 0, freq_out, sysclk);
> >
> 
> Thanks Arnd.
> 
> Looks sspa_div is not used at all.
> So we can remove sspa_div as well as do_div.
> 
> What do you think.

Good idea. I see that Mark has already applied the original patch, and with
my new version, gcc should be smart enough to completely optimize out the
division and the unused variable. This means the effect of the patch
is very small, but if Mark wants it, he can apply the below.

	Arnd

8<---
Subject: ASoC: remove unused variable

As pointed out by Zhangfei Gao, the sspa_div variable in
brownstone_wm8994_hw_params() is completely unused, so as a cleanup
following a prior patch, this removes both the variable and the division.

Signed-off-by: Arnd Bergmann <arnd at arndb.de>

diff --git a/sound/soc/pxa/brownstone.c b/sound/soc/pxa/brownstone.c
index 416ea646c3b1..ec522e94b0e2 100644
--- a/sound/soc/pxa/brownstone.c
+++ b/sound/soc/pxa/brownstone.c
@@ -52,7 +52,6 @@ static int brownstone_wm8994_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	int freq_out, sspa_mclk, sysclk;
-	int sspa_div;
 
 	if (params_rate(params) > 11025) {
 		freq_out  = params_rate(params) * 512;
@@ -63,7 +62,6 @@ static int brownstone_wm8994_hw_params(struct snd_pcm_substream *substream,
 		sysclk    = params_rate(params) * 512;
 		sspa_mclk = params_rate(params) * 64;
 	}
-	sspa_div = freq_out / sspa_mclk;
 
 	snd_soc_dai_set_sysclk(cpu_dai, MMP_SSPA_CLK_AUDIO, freq_out, 0);
 	snd_soc_dai_set_pll(cpu_dai, MMP_SYSCLK, 0, freq_out, sysclk);




More information about the linux-arm-kernel mailing list