[PATCH 1/4] ARM: shmobile: bockw: Move SPI FLASH partition to subnode
Simon Horman
horms+renesas at verge.net.au
Fri Nov 20 11:38:52 PST 2015
From: Geert Uytterhoeven <geert+renesas at glider.be>
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a
dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions
in a special 'partitions' subnode"), having partitions as direct subnodes
of an mtd device is discouraged. Hence move the SPI FLASH partition to a
"partitions" subnode.
Based on similar work for the koelsch board by Geert Uytterhoeven.
Cc: Geert Uytterhoeven <geert+renesas at glider.be>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
arch/arm/boot/dts/r8a7778-bockw.dts | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 90543b12d7e2..bf77ff569ca1 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -184,16 +184,19 @@
status = "okay";
flash: flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl008k", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <104000000>;
m25p,fast-read;
- partition at 0 {
- label = "data(spi)";
- reg = <0x00000000 0x00100000>;
+ partitions {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "data(spi)";
+ reg = <0x00000000 0x00100000>;
+ };
};
};
};
--
2.1.4
More information about the linux-arm-kernel
mailing list